Thermal-mechanical simulation of T/R microwave module assembly process

Chun Pei; Guicui Fu; Qing Li; Dong Zhang

doi:10.1109/PHM.2014.6988205

Thermal-mechanical simulation of T/R microwave module assembly process

Chun Pei
, Guicui Fu
, Qing Li
, Dong Zhang

可靠性与系统工程学院

Beihang University

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

3 引用（Scopus）

摘要

T/R-modules are key elements in active phased array antennas for radar and electronic warfare applications. Though much research has been carried out on the T/R microwave module operating characteristics, there are few actual studies on its assembly process. Considering many process failures found in T/R microwave module manufacturing, the assembly process, including welding and screwing, and environment test, was simulated by Finite Element Analysis (FEA) in the paper. Different flatness models were built to assess the effect of warpage. The thermal and mechanical stress values of each assembly process were showed and the results were analyzed to determine the key factors and the improvement measures to the assembly process.

源语言	英语
主期刊名	Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014
出版商	Institute of Electrical and Electronics Engineers Inc.
页	414-417
页数	4
ISBN（电子版）	9781479979585
DOI	https://doi.org/10.1109/PHM.2014.6988205
出版状态	已出版 - 16 12月 2014
活动	2014 Prognostics and System Health Management Conference, PHM 2014 - Zhangiiaijie City, 中国期限: 24 8月 2014 → 27 8月 2014

出版系列

姓名	Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014

会议

会议	2014 Prognostics and System Health Management Conference, PHM 2014
国家/地区	中国
市	Zhangiiaijie City
时期	24/08/14 → 27/08/14

访问文件

10.1109/PHM.2014.6988205

其它文件与链接

链接到 Scopus 的出版物

引用此

Pei, C., Fu, G., Li, Q., & Zhang, D. (2014). Thermal-mechanical simulation of T/R microwave module assembly process. 在 Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014 (页码 414-417). 文章 6988205 (Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PHM.2014.6988205

@inproceedings{748ee6dfc6f3456a818fa257a2724445,

title = "Thermal-mechanical simulation of T/R microwave module assembly process",

abstract = "T/R-modules are key elements in active phased array antennas for radar and electronic warfare applications. Though much research has been carried out on the T/R microwave module operating characteristics, there are few actual studies on its assembly process. Considering many process failures found in T/R microwave module manufacturing, the assembly process, including welding and screwing, and environment test, was simulated by Finite Element Analysis (FEA) in the paper. Different flatness models were built to assess the effect of warpage. The thermal and mechanical stress values of each assembly process were showed and the results were analyzed to determine the key factors and the improvement measures to the assembly process.",

keywords = "ANSYS, T/R microwave module, assembly process, thermal-mechanical simulation",

author = "Chun Pei and Guicui Fu and Qing Li and Dong Zhang",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 2014 Prognostics and System Health Management Conference, PHM 2014 ; Conference date: 24-08-2014 Through 27-08-2014",

year = "2014",

month = dec,

day = "16",

doi = "10.1109/PHM.2014.6988205",

language = "英语",

series = "Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "414--417",

booktitle = "Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014",

address = "美国",

}

Pei, C, Fu, G, Li, Q & Zhang, D 2014, Thermal-mechanical simulation of T/R microwave module assembly process. 在 Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014., 6988205, Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014, Institute of Electrical and Electronics Engineers Inc., 页码 414-417, 2014 Prognostics and System Health Management Conference, PHM 2014, Zhangiiaijie City, 中国, 24/08/14. https://doi.org/10.1109/PHM.2014.6988205

Thermal-mechanical simulation of T/R microwave module assembly process. / Pei, Chun; Fu, Guicui; Li, Qing 等.
Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014. Institute of Electrical and Electronics Engineers Inc., 2014. 页码 414-417 6988205 (Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Thermal-mechanical simulation of T/R microwave module assembly process

AU - Pei, Chun

AU - Fu, Guicui

AU - Li, Qing

AU - Zhang, Dong

PY - 2014/12/16

Y1 - 2014/12/16

N2 - T/R-modules are key elements in active phased array antennas for radar and electronic warfare applications. Though much research has been carried out on the T/R microwave module operating characteristics, there are few actual studies on its assembly process. Considering many process failures found in T/R microwave module manufacturing, the assembly process, including welding and screwing, and environment test, was simulated by Finite Element Analysis (FEA) in the paper. Different flatness models were built to assess the effect of warpage. The thermal and mechanical stress values of each assembly process were showed and the results were analyzed to determine the key factors and the improvement measures to the assembly process.

AB - T/R-modules are key elements in active phased array antennas for radar and electronic warfare applications. Though much research has been carried out on the T/R microwave module operating characteristics, there are few actual studies on its assembly process. Considering many process failures found in T/R microwave module manufacturing, the assembly process, including welding and screwing, and environment test, was simulated by Finite Element Analysis (FEA) in the paper. Different flatness models were built to assess the effect of warpage. The thermal and mechanical stress values of each assembly process were showed and the results were analyzed to determine the key factors and the improvement measures to the assembly process.

KW - ANSYS

KW - T/R microwave module

KW - assembly process

KW - thermal-mechanical simulation

UR - https://www.scopus.com/pages/publications/84943139903

U2 - 10.1109/PHM.2014.6988205

DO - 10.1109/PHM.2014.6988205

M3 - 会议稿件

AN - SCOPUS:84943139903

T3 - Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014

SP - 414

EP - 417

BT - Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2014 Prognostics and System Health Management Conference, PHM 2014

Y2 - 24 August 2014 through 27 August 2014

ER -

Pei C, Fu G, Li Q, Zhang D. Thermal-mechanical simulation of T/R microwave module assembly process. 在 Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014. Institute of Electrical and Electronics Engineers Inc. 2014. 页码 414-417. 6988205. (Proceedings of 2014 Prognostics and System Health Management Conference, PHM 2014). doi: 10.1109/PHM.2014.6988205

Thermal-mechanical simulation of T/R microwave module assembly process

摘要

出版系列

会议

访问文件

其它文件与链接

学术指纹

引用此