TY - JOUR
T1 - Synchronous Removal of Fluoride and Iodide on Fe-Mn Binary Oxides Interface
T2 - Competitive Adsorption Behaviors and Mechanism
AU - Wang, Nan
AU - Liang, He
AU - Zhang, Meng
AU - Liu, Ruiping
AU - Li, Lina
AU - Zhao, Li
AU - Liu, Huijuan
AU - Qu, Jiuhui
N1 - Publisher Copyright:
© 2024 American Chemical Society.
PY - 2024/8/9
Y1 - 2024/8/9
N2 - The coexistence of high-concentration iodide (I-) and fluoride (F-) in high-iodine groundwater increases the occurrence of endemic diseases such as iodine-induced disorders and fluorosis, and their simultaneous removal has rarely been investigated. In this study, we developed cost-effective Fe/Mn binary oxides (FMBOs) with different Fe/Mn molar ratios (RFe:Mn) and investigated their performance and selective adsorption mechanisms for the synchronous removal of I- and F-. By optimizing the RFe:Mn ratios, an FMBO with RFe:Mn = 0.5:1 was developed to achieve synchronous removal of I- and F- with efficiencies of 67.7 and 80.7%, respectively, when the initial concentrations of I- and F- were 200 μg/L and 1.5 mg/L, and the FMBO dosage was 1.0 g/L. As the pH increases, the removal efficiency of I- and F- by FMBO decreases. According to the results of X-ray photoelectron spectroscopy (XPS), high-performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP/MS), and X-ray absorption spectroscopy results (XAS), FMBO is mainly composed of Fe(III), Mn(IV), and Mn(III). Mn oxide is mainly responsible for the heterogeneous oxidation of I-, whereas Fe oxide dominates in the adsorption of I- and F-. Based on density functional theory (DFT) calculations, the adsorption of SO42-, NO3-, and HCO3- was achieved via the formation of Fe-O bonds; moreover, the adsorption of I- and F- was attributed to the formation of Fe-I/F bonds. This study provides insight into the site-specific mechanism involved in I- and F- adsorption onto low-cost FMBO in realistic high-iodide groundwaters with complex coexisting anions.
AB - The coexistence of high-concentration iodide (I-) and fluoride (F-) in high-iodine groundwater increases the occurrence of endemic diseases such as iodine-induced disorders and fluorosis, and their simultaneous removal has rarely been investigated. In this study, we developed cost-effective Fe/Mn binary oxides (FMBOs) with different Fe/Mn molar ratios (RFe:Mn) and investigated their performance and selective adsorption mechanisms for the synchronous removal of I- and F-. By optimizing the RFe:Mn ratios, an FMBO with RFe:Mn = 0.5:1 was developed to achieve synchronous removal of I- and F- with efficiencies of 67.7 and 80.7%, respectively, when the initial concentrations of I- and F- were 200 μg/L and 1.5 mg/L, and the FMBO dosage was 1.0 g/L. As the pH increases, the removal efficiency of I- and F- by FMBO decreases. According to the results of X-ray photoelectron spectroscopy (XPS), high-performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP/MS), and X-ray absorption spectroscopy results (XAS), FMBO is mainly composed of Fe(III), Mn(IV), and Mn(III). Mn oxide is mainly responsible for the heterogeneous oxidation of I-, whereas Fe oxide dominates in the adsorption of I- and F-. Based on density functional theory (DFT) calculations, the adsorption of SO42-, NO3-, and HCO3- was achieved via the formation of Fe-O bonds; moreover, the adsorption of I- and F- was attributed to the formation of Fe-I/F bonds. This study provides insight into the site-specific mechanism involved in I- and F- adsorption onto low-cost FMBO in realistic high-iodide groundwaters with complex coexisting anions.
KW - adsorption
KW - Fe−Mn binary oxide
KW - fluoride
KW - iodide
KW - moderate oxidation
UR - https://www.scopus.com/pages/publications/85195562644
U2 - 10.1021/acsestengg.4c00173
DO - 10.1021/acsestengg.4c00173
M3 - 文章
AN - SCOPUS:85195562644
SN - 2690-0645
VL - 4
SP - 2015
EP - 2024
JO - ACS ES and T Engineering
JF - ACS ES and T Engineering
IS - 8
ER -