Research on the parameter design method and system simulation of multimode microwave remote sensors operating in scatterometer modes

Multimode microwave remote sensors are a new type of radar system that operates in SAR (synthetic aperture radar), scatterometer, altimeter, and spectrometer modes in a time-sharing manner according to the current task scheduled on small satellites. High flexibility through mode switching is the outstanding advantage of this new microwave remote sensor. Two or more small satellites operating in different operation modes can be networked to perform observations synchronously to provide excellent remote sensing performance. This paper focuses on a method to determine the radar parameters of the scatterometer mode since the frequency band and the platform height of this new of kind sensor are determined according to the requirement of the SAR mode, and their values are evidently different from the values of current scatterometers in orbit. The proposed method systematically presents the complete steps and related formulae of the radar parameter design of scatterometers and determines the signal bandwidth by optimization. A system simulation method of the scatterometer mode is further studied to determine the wind field inversion error and thus evaluate the rationality of the parameter design results. In contrast to the existing methods, which directly add noise to the backscatter coefficients, our method simulates the noisy echo of the scatterometer and then retrieves the wind field by estimated backscatter coefficients from the noisy echo. The performed simulation shows that, by using the designed system parameters, the multimode microwave remote sensor obtains wind field inversion accuracy, resolution and swath width comparable to those of the HY-2 satellite and the QuikSCAT satellite.