Modeling on the momentum and heat/mass transfer characteristics of an argon plasma jet issuing into air surroundings and interacting with a counter-injected argon jet

Modeling study is performed to reveal the momentum and heat/mass transfer characteristics of a turbulent or laminar plasma reactor consisting of an argon plasma jet issuing into ambient air and interacting with a co-axially counter-injected argon jet. The combined-diffusion-coefficient method and the turbulence-enhanced combined-diffusion-coefficient method are employed to treat the diffusion of argon in the argon-air mixture for the laminar and the turbulent regimes, respectively. Modeling results presented include the streamline, isotherm and argon mass fraction distributions for the cases with different jet-inlet parameters and different distances between the counter-injected jet exit and the plasma torch exit. It is shown that there exists a quench layer with steep temperature gradients inside the reactor; a great amount of ambient air is always entrained into the plasma reactor; and the flow direction of the entrained air, the location and shape of the quench layer are dependent on the momentum flux ratio of the plasma jet to the counter-injected cold gas. Two quite different flow patterns are obtained at higher and lower momentum flux ratios, and thus there exists a critical momentum flux ratio to separate the different flow patterns and to obtain the widest quench layer. There exists a high argon concentration or even 'air-free' channel along the reactor axis. No appreciable difference is found between the turbulent and laminar plasma reactors in their overall plasma parameter distributions and the quench layer locations, but the values of the critical momentum flux ratio are somewhat different.