Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition

G. A. Ravi; Chunlei Qiu; Moataz M. Attallah

doi:10.1016/j.matlet.2016.05.038

Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition

G. A. Ravi
, Chunlei Qiu^*
, Moataz M. Attallah

^*此作品的通讯作者

University of Birmingham

科研成果: 期刊稿件 › 文章 › 同行评审

46 引用（Scopus）

摘要

Ti-6Al-4V samples have been fabricated by direct laser deposition using different laser powers and two different laser processing modes, continuous wave (CW) mode and CW+PW (pulsed wave) mode. The as-fabricated microstructure was investigated using photography, optical microscopy and secondary electron microscopy. It was found that both laser mode and laser power show significant influence on grain structure. The CW mode generally leads to well-developed large columnar grains whereas the CW+PW mode tends to give rise to much finer equiaxed grains. Higher laser power was found to result in larger grains and coarser microstructure.

源语言	英语
页（从-至）	104-108
页数	5
期刊	Materials Letters
卷	179
DOI	https://doi.org/10.1016/j.matlet.2016.05.038
出版状态	已出版 - 15 9月 2016
已对外发布	是

访问文件

10.1016/j.matlet.2016.05.038

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{fe9a19ff96674badac47b100e5f7867d,

title = "Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition",

abstract = "Ti-6Al-4V samples have been fabricated by direct laser deposition using different laser powers and two different laser processing modes, continuous wave (CW) mode and CW+PW (pulsed wave) mode. The as-fabricated microstructure was investigated using photography, optical microscopy and secondary electron microscopy. It was found that both laser mode and laser power show significant influence on grain structure. The CW mode generally leads to well-developed large columnar grains whereas the CW+PW mode tends to give rise to much finer equiaxed grains. Higher laser power was found to result in larger grains and coarser microstructure.",

keywords = "Direct Laser Deposition, Laser Mode, Microstructure, Ti-6Al-4V",

author = "Ravi, \{G. A.\} and Chunlei Qiu and Attallah, \{Moataz M.\}",

note = "Publisher Copyright: {\textcopyright} 2016 Elsevier B.V.",

year = "2016",

month = sep,

day = "15",

doi = "10.1016/j.matlet.2016.05.038",

language = "英语",

volume = "179",

pages = "104--108",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition

AU - Ravi, G. A.

AU - Qiu, Chunlei

AU - Attallah, Moataz M.

PY - 2016/9/15

Y1 - 2016/9/15

N2 - Ti-6Al-4V samples have been fabricated by direct laser deposition using different laser powers and two different laser processing modes, continuous wave (CW) mode and CW+PW (pulsed wave) mode. The as-fabricated microstructure was investigated using photography, optical microscopy and secondary electron microscopy. It was found that both laser mode and laser power show significant influence on grain structure. The CW mode generally leads to well-developed large columnar grains whereas the CW+PW mode tends to give rise to much finer equiaxed grains. Higher laser power was found to result in larger grains and coarser microstructure.

AB - Ti-6Al-4V samples have been fabricated by direct laser deposition using different laser powers and two different laser processing modes, continuous wave (CW) mode and CW+PW (pulsed wave) mode. The as-fabricated microstructure was investigated using photography, optical microscopy and secondary electron microscopy. It was found that both laser mode and laser power show significant influence on grain structure. The CW mode generally leads to well-developed large columnar grains whereas the CW+PW mode tends to give rise to much finer equiaxed grains. Higher laser power was found to result in larger grains and coarser microstructure.

KW - Direct Laser Deposition

KW - Laser Mode

KW - Microstructure

KW - Ti-6Al-4V

UR - https://www.scopus.com/pages/publications/84969172354

U2 - 10.1016/j.matlet.2016.05.038

DO - 10.1016/j.matlet.2016.05.038

M3 - 文章

AN - SCOPUS:84969172354

SN - 0167-577X

VL - 179

SP - 104

EP - 108

JO - Materials Letters

JF - Materials Letters

ER -

Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition

摘要

访问文件

其它文件与链接

指纹

引用此