TY - JOUR
T1 - Metal powder testing with the employment of electrical impedance spectroscopy
AU - Solecka, Barbara
AU - Tytko, Grzegorz
AU - Michczyński, Adam
AU - Feng, Bo
AU - Xie, Yuedong
N1 - Publisher Copyright:
© 2025 The Author(s)
PY - 2025/12/1
Y1 - 2025/12/1
N2 - This paper presents a completely new approach for testing metal powders using electrical impedance spectroscopy. The developed method can be employed in powder metallurgy and in soil, sand, and sediment studies. Ampoules with powder mixtures are placed inside coils that have been designed and constructed specifically for this purpose. The measured values of the coil impedance made it possible to distinguish between mixtures with different metal powder contents. In this way, two- and three-component mixtures were tested based on paramagnetic Fe2O3 powder, ferromagnetic Fe3O4 powder, and sand. The measurements are performed with two coils within the frequency range from 100 kHz to 170 kHz, and the results are presented on impedance diagrams and in the form of numerical data. In all cases, very large changes in the coil resistance and reactance are obtained, which allows for an unambiguous distinction between the tested mixtures. The developed method enables the measurement of a single sample in the entire frequency range in just a few seconds. The cheap and easy-to-use measurement system consists merely of a coil and an impedance meter, which allows its widespread use in every laboratory.
AB - This paper presents a completely new approach for testing metal powders using electrical impedance spectroscopy. The developed method can be employed in powder metallurgy and in soil, sand, and sediment studies. Ampoules with powder mixtures are placed inside coils that have been designed and constructed specifically for this purpose. The measured values of the coil impedance made it possible to distinguish between mixtures with different metal powder contents. In this way, two- and three-component mixtures were tested based on paramagnetic Fe2O3 powder, ferromagnetic Fe3O4 powder, and sand. The measurements are performed with two coils within the frequency range from 100 kHz to 170 kHz, and the results are presented on impedance diagrams and in the form of numerical data. In all cases, very large changes in the coil resistance and reactance are obtained, which allows for an unambiguous distinction between the tested mixtures. The developed method enables the measurement of a single sample in the entire frequency range in just a few seconds. The cheap and easy-to-use measurement system consists merely of a coil and an impedance meter, which allows its widespread use in every laboratory.
UR - https://www.scopus.com/pages/publications/105008820128
U2 - 10.1016/j.measurement.2025.118253
DO - 10.1016/j.measurement.2025.118253
M3 - 文章
AN - SCOPUS:105008820128
SN - 0263-2241
VL - 256
JO - Measurement: Journal of the International Measurement Confederation
JF - Measurement: Journal of the International Measurement Confederation
M1 - 118253
ER -