Loading capacity, rotation loss and torsional oscillation research on an Evershed-type hybrid superconducting bearing used for micro-thrust measurements

Characterized by their very low rotational drag, applications of high-temperature superconductor (HTS) bearings have been expanded in some high-precision instruments. We have developed a sensitive magnetic suspension stand based on an Evershed-type hybrid HTS bearing to measure μN-level thrust. The hybrid HTS bearing uses the strong attractive force of a permanent magnet (PM)-biased bearing to support the main load in the bearing, while instability in the PM-biased bearing is compensated by the magnetic stability from a HTS bearing. Compared with a single PM/HTS bearing, the hybrid HTS bearing is intended not only to support larger loads but also to suppress rotation loss and levitation drift. Loading capacity, loss and damping torque were explored for different design parameters such as bearing gaps L ₁, L ₂ and the field cooling height (FCH) of bulk HTSs. Spin-down testing suggested that the loss of a hybrid HTS bearing can be reduced by increasing the HTS bearing gap L ₂ or reducing the FCH. The hybrid HTS bearing showed a typical oscillation behavior at extreme low frequencies, and torsional pendulum testing suggested that the spring constant k of the hybrid HTS bearing can be as low as 36.39 μN m deg^-1. A micro-thrust stand based on the hybrid HTS bearing was established to test an electrospray thruster in a vacuum chamber, and the measurement result of 26.61 μN shows the ability of the micro-thrust stand to achieve μN level testing.