Investigations on system integration method and dynamic performance of electromechanical actuator

A highly integrated electromechanical actuator was developed in this article, which aims at fulfilling the requirements of high power-to-weight ratio, high efficiency, high integration and low volume in military equipment. Three different transmission schemes were proposed for the integrated electromechanical actuator according to the differences in integration methods. Comparative analysis was conducted on the specific structures of the integrated electromechanical actuator and the categories and performance of the planetary roller screw, which is the key unit of the integrated electromechanical actuator. An integrated electromechanical actuator was designed based on the project requirements. A mathematical model was established and the system transfer function was derived. Based on this, a simulation model of the position loop system was established using the AMESim software and the effects of some related parameters, such as friction, backlash and stiffness, on the dynamic performance of the system were investigated. The related theory and simulation results were experimentally validated by a self-developed integrated electromechanical actuator research prototype combined with the related test system. The data obtained from the step response tests, sinusoidal response tests and repeat locating accuracy tests indicated that the developed integrated electromechanical actuator prototype is of rapid, accurate and stable position tracking capability.