Influence of dynamic angles and cutting strain on chip morphology and cutting forces during titanium alloy Ti-6Al-4 V vibration-assisted drilling

Vibration-assisted machining (VAM) is implemented in titanium alloy processing to solve some challenges, such as difficulty in chip breaking, large cutting forces, and high cutting temperatures. Based on the multi-region dynamic angles and the double-side wedge angle deformation mechanism, this study improves the vibration-assisted drilling (VAD) cutting forces and chip breaking model. The dynamic kinematics angles, the behavior of parameter influence, and the cutting strain effect of intermittent VAM are analyzed. VAD and conventional drilling (CD) experiments are carried out for model validation and mechanism analysis. The experiments show that the maximum deviation of the drilling forces simulation value and the experimental value is 9.13 %. Compared with the CD, the cutting force of the VAD is decreased by 10.1 %–46.2 %. The dynamic feed angle causes multiple cutting angles fluctuations, which affects cutting performance. The adjustment of the VAD cutting parameter value could reduce the chip length by 26.6 %–43.9 %. Material cutting strain presents multi-region characteristic, which influences the chip morphology. This study provides a reference for VAM parameter optimization.