Flow stability analysis on low-speed compressor with swept rotor blades under radial inlet distortions

Flow stability enhancement for axial flow compressors under radially distorted inlet conditions through rotor sweep design is an important issue for designers. To investigate the couped effect of rotor swept and radial inlet distortion on flow stability, steady numerical simulations, theoretical model predictions, and experimental validations were conducted for a low-speed, single-stage axial compressor (TA36) under various intensities of tip total pressure distorted inlet conditions with different swept rotor configurations. The steady pressure rise significantly decreases as the intensity of the distortion increases, whereas the rotor sweep has little effect on the pressure rise characteristic. The maximum error via model prediction is 1.25 %, while for steady numerical calculation, it is 3.89 %. Higher intensities of distortion lead to worse flow stability. Under radially distorted inlet conditions, forward sweep enhances flow stability whereas backward sweep further worsens it. What's more, quantitative analysis shows that the stability enhancement of forward sweep cannot fully counteract the adverse impact of radial distortion on flow stability. Elevated rotor tip loading was identified as the primary cause of instability under tip total pressure distorted inlet conditions. Forward sweep can slightly reduce this loading, whereas backward sweep has the opposite effect. Furthermore, the impact of rotor sweep on rotor tip loading intensifies with increasing distortion intensity. Unsteady flow field analysis was conducted. Which shows that radial distortion and blade sweep both affect flow stability by altering the intensity of tip leakage flow.