Experimental study on critical state behaviour of unsaturated silty sand under constant matric suctions

There are relatively few experimental studies on the hydromechanical and critical state behaviours of unsaturated silty sand. In this paper, suction-controlled, consolidated, drained triaxial shear tests were conducted on silty sand under saturated (net confining pressures of 100, 200, 300 and 400 kPa) and unsaturated (suctions of 30, 100 and 200 kPa and net confining pressures of 100, 200 and 300 kPa) conditions. For unsaturated silty sand, the effects of dry density, matric suction and net confining pressure on the hydromechanical and critical state behaviour were investigated, and the critical state parameters were obtained. The main findings for unsaturated silty sand included shear shrinkage at low dry density (1·6 g/cm³) and dilatancy at higher density (1·96 g/cm³). The peak shear strength was positively correlated with dry density, matric suction and net confining pressure. The critical state volumetric strain and critical state degree of saturation were negatively correlated with dry density and matric suction but positively correlated with net confining pressure. A new dilatancy equation that includes the state parameter for unsaturated silty sand was established. A unique critical state line passes through the origin in the effective stress (p*)–deviator (q) plane, and its slope is the saturated critical state stress ratio (M_s). In the lnp*–v plane (v is the specific volume), the critical state lines corresponding to different matric suctions are parallel.