Electrical and mechanical properties of ink printed composite electrodes on plastic substrates

Printed flexible electrodes with conductive inks have attracted much attention in wearable electronics, flexible displays, radio-frequency identification, etc. Conventional conductive inks contain large amount of polymer which would increase the electrical resistivity of as-printed electrodes and require high sintering temperature. Here, composite electrodes without cracks were printed on polyimide substrate using binder-free silver nanoparticle based inks with zero-dimensional (activated carbon), one-dimensional (silver nanowire and carbon nanotube) or two-dimensional (graphene) fillers. The effect of fillers on resistivity and flexibility of printed composite electrodes were evaluated. The graphene filler could reduce the resistivity of electrodes, reaching 1.7 × 10^-7 Ω·m after low power laser sintering, while the silver nanowire filler improved their flexibility largely during bending tests. The microstructural changes were examined to understand the nanojoining process and their properties.