Effects of loading processes on contact forces when simulating static seating with a finite element human body model

Seat interface forces, particularly shear forces, play an essential role in predicting the risk of pressure ulcers and seating discomfort. When a finite element human body model (HBM) is used for static seating simulation, the most common loading method is to put the model in a position close to the desired final posture and then ‘drop’ it from just above the seat by applying the gravity (DROP). This does not represent how people sit in a seat. In addition, high coefficients of friction (COF) are often used to prevent sliding, which may lead to unrealistically high tangential forces. This study aims to investigate the effects of the loading process and the COF on seating simulations with a HBM. We propose a new loading approach called ‘drop and rotate’ (D&R) to better mimic people sitting on a seat. With the trunk more flexed than the desired posture, the model is dropped to establish the contact between the buttocks and thighs, and the seat pan first, and then between the back and the backrest by rotating the hip. Simulations were performed using a recently developed and validated adult male model in two different seat configurations. Results show that the proposed D&R method was less sensitive to COF and gave a better prediction of contact forces, especially on the seat pan. However, its computational time is higher than the DROP method. The study highlights the importance of the loading process when simulating static seating.