Effects of F, B₂O₃ and P₂O₅ on the solubility of water in haplogranite melts compared to natural silicate melts

The effects of F, B₂O₃ and P₂O₅ on the H₂O solubility in a haplogranite liquid (36 wt. % SiO₂, 39 wt. % NaAlSi₃O₈, 25 wt. % KAlSi₃O₈) have been determined at 0.5, 1, 2, and 3 kb and 800, 850, and 900°C. The H₂O solubility increases with increasing F and B content of the melt. The H₂O solubility increase in more important at high pressure (2 and 3 kb) than at low pressure (0.5 kb). At 2 kb and 800°C, the H₂O solubility increases from 5.94 to 8.22 wt. % H₂O with increasing F content in the melt from 0 to 4.55 wt. %, corresponding to a linear H₂O solubility increase of 0.53 mol H₂O/mol F. With addition of 4.35 wt. % B₂O₃, the H₂O solubility increases up to 6.86 wt. % H₂O at 2 kb and 800°C, corresponding to a linear increase of 1.05 mol H₂O/mol B₂O₃. The results allow to define the individual effects of fluorine and boron on H₂O solubility in haplogranitic melts with compositions close to that of H₂O-saturated thermal minima (at 0.5-3 kb). Although P has a dramatic effect on the phase relations in the haplogranite system, its effect on the H₂O solubility was found to be negligible in natural melt compositions. The concominant increase in H₂O solubility and F can not be interpreted on the basis of the available spectroscopic data (existence of hydrated aluminofluoride complexes or not). In contrast, hydrated borates or more probably boroxol complexes have been demonstrated in B-bearing hydrous melts.