Development of microscale pattern for digital image correlation up to 1400 °c

Speckle patterns to be used for digital image correlation (DIC) at the micrometer level up to 1400 °C were fabricated by several methods. The quality of the patterns before and after heating was evaluated in terms of the mean intensity gradient (MIG) and the speckle size distribution. The displacement accuracy in simulative translation of images showed that the MIG alone was not enough to evaluate the pattern properties; a large MIG, an even speckle size distribution, and a wide speckle size range pattern were required for a good DIC. The reaction between the patterning material and substrate, the cracking of speckles, and the plastic flow of patterning material may cause changes in the pattern morphology at high temperature. Two patterning methods, spraying a mixture of ceramics powder and binder by a fine-nozzle air brush and abrading a polished surface, yielded a small pattern with high MIG values and even size distributions that was stable at 1400 °C. The potential of the fabricated patterns was shown by measuring the coefficient of thermal expansion of polycrystalline Al₂O₃ from 800 °C to 1400 °C.