TY - GEN
T1 - Design of a large diameter steel reinforced plastic pipe
AU - Shi, Jun
AU - Rao, Jing
AU - Shi, Jianfeng
AU - Xu, Ping
AU - Shao, Taiqing
AU - Shao, Hanzeng
AU - Chen, Defu
AU - Li, Guangzhong
AU - He, Xiaolian
PY - 2011
Y1 - 2011
N2 - A steel reinforced plastic pipe (PSP), which is composed of two layers of high density polyethylene (HDPE) matrix and a high strength steel wire mesh skeleton, has wide applications in many industrial areas, such as gas and petroleum transportation, etc. In order to achieve higher efficency and lower costs, a large diameter PSP has been developed. However, requirements of the large diameter PSP in safety and economy are much higher, compared with those small diameter PSPs, and some potential problems should be taken into account. In this paper, relevant structural parameters of the large diameter PSP are determined, based on a previously proposed model, and a short-term burst test is carried out. The experiment results agree with the theoretical results quite well. Subsequently, the resistance of vertical pressure and uniform external pressure are evaluated by using experiment investigation and finite element method, respectively. And corresponding results indicate the large diameter PSP with determined structural parameters is qualified to use.
AB - A steel reinforced plastic pipe (PSP), which is composed of two layers of high density polyethylene (HDPE) matrix and a high strength steel wire mesh skeleton, has wide applications in many industrial areas, such as gas and petroleum transportation, etc. In order to achieve higher efficency and lower costs, a large diameter PSP has been developed. However, requirements of the large diameter PSP in safety and economy are much higher, compared with those small diameter PSPs, and some potential problems should be taken into account. In this paper, relevant structural parameters of the large diameter PSP are determined, based on a previously proposed model, and a short-term burst test is carried out. The experiment results agree with the theoretical results quite well. Subsequently, the resistance of vertical pressure and uniform external pressure are evaluated by using experiment investigation and finite element method, respectively. And corresponding results indicate the large diameter PSP with determined structural parameters is qualified to use.
KW - Analytical model
KW - Composite pipe
KW - Mechanical properties
KW - Structual parameters
UR - https://www.scopus.com/pages/publications/84881439376
U2 - 10.1115/PVP2011-57297
DO - 10.1115/PVP2011-57297
M3 - 会议稿件
AN - SCOPUS:84881439376
SN - 9780791844533
T3 - American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
SP - 181
EP - 186
BT - ASME 2011 Pressure Vessels and Piping Conference, PVP 2011
T2 - ASME 2011 Pressure Vessels and Piping Conference, PVP 2011
Y2 - 17 July 2011 through 21 July 2011
ER -