Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate

Chunping Wu; Fengshuo Zhang; Yongkang Li; Shiwei Zhao; Daochun Li

doi:10.1007/978-981-95-5849-0_19

Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate

Chunping Wu
, Fengshuo Zhang
, Yongkang Li
, Shiwei Zhao^*
, Daochun Li

^*此作品的通讯作者

航空科学与工程学院

Beihang University

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

摘要

This paper takes the wing rib plate beam structure as an object, and its structural response data and the mode shapes are obtained through Abaqus simulation and the NExT-ERA, respectively. The curvature mode change rate, based on curvature mode, is treat as the damage indicator for damage identification of the wing rib plate beam structure, which is firstly identified by the wing rib plate beam without holes as an object, and then by the rib plate beam with holes. The results show that the curvature mode change rate has a good effect on recognizing the damage of the complex wing rib beam structure, which helps to build the wing structural health monitoring system.

源语言	英语
主期刊名	Intelligent Manufacturing and Mechanical Automation - Select Proceedings of the 5th International Conference, MEMAT 2024
编辑	Sanjay Yadav, Vikas Narayan Thakur, Pavan Kumar Kankar, Wenjie Chen, Shubin Yan
出版商	Springer Science and Business Media Deutschland GmbH
页	187-194
页数	8
ISBN（印刷版）	9789819558483
DOI	https://doi.org/10.1007/978-981-95-5849-0_19
出版状态	已出版 - 2026
活动	5th International Conference on Mechanical Engineering, Intelligent Manufacturing and Automation Technology, MEMAT 2024 - Nanjing, 中国期限: 27 12月 2024 → 29 12月 2024

丛书

姓名	Lecture Notes in Mechanical Engineering
ISSN（印刷版）	2195-4356
ISSN（电子版）	2195-4364

会议

会议	5th International Conference on Mechanical Engineering, Intelligent Manufacturing and Automation Technology, MEMAT 2024
国家/地区	中国
市	Nanjing
时期	27/12/24 → 29/12/24

访问文件

10.1007/978-981-95-5849-0_19

其它文件与链接

链接到 Scopus 的出版物

引用此

Wu, C., Zhang, F., Li, Y., Zhao, S., & Li, D. (2026). Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate. 在 S. Yadav, V. N. Thakur, P. K. Kankar, W. Chen, & S. Yan (版本), Intelligent Manufacturing and Mechanical Automation - Select Proceedings of the 5th International Conference, MEMAT 2024 (页码 187-194). (Lecture Notes in Mechanical Engineering). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-95-5849-0_19

Wu, Chunping ; Zhang, Fengshuo ; Li, Yongkang 等. / Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate. Intelligent Manufacturing and Mechanical Automation - Select Proceedings of the 5th International Conference, MEMAT 2024. 编辑 / Sanjay Yadav ; Vikas Narayan Thakur ; Pavan Kumar Kankar ; Wenjie Chen ; Shubin Yan. Springer Science and Business Media Deutschland GmbH, 2026. 页码 187-194 (Lecture Notes in Mechanical Engineering).

@inproceedings{1f6944eb657f43b4aabe4d2167434c12,

title = "Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate",

abstract = "This paper takes the wing rib plate beam structure as an object, and its structural response data and the mode shapes are obtained through Abaqus simulation and the NExT-ERA, respectively. The curvature mode change rate, based on curvature mode, is treat as the damage indicator for damage identification of the wing rib plate beam structure, which is firstly identified by the wing rib plate beam without holes as an object, and then by the rib plate beam with holes. The results show that the curvature mode change rate has a good effect on recognizing the damage of the complex wing rib beam structure, which helps to build the wing structural health monitoring system.",

keywords = "Damage identification, The curvature mode change rate, The wing rib plate beam",

author = "Chunping Wu and Fengshuo Zhang and Yongkang Li and Shiwei Zhao and Daochun Li",

note = "Publisher Copyright: {\textcopyright} The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2026.; 5th International Conference on Mechanical Engineering, Intelligent Manufacturing and Automation Technology, MEMAT 2024 ; Conference date: 27-12-2024 Through 29-12-2024",

year = "2026",

doi = "10.1007/978-981-95-5849-0\_19",

language = "英语",

isbn = "9789819558483",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "187--194",

editor = "Sanjay Yadav and Thakur, \{Vikas Narayan\} and Kankar, \{Pavan Kumar\} and Wenjie Chen and Shubin Yan",

booktitle = "Intelligent Manufacturing and Mechanical Automation - Select Proceedings of the 5th International Conference, MEMAT 2024",

address = "德国",

}

Wu, C, Zhang, F, Li, Y, Zhao, S & Li, D 2026, Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate. 在 S Yadav, VN Thakur, PK Kankar, W Chen & S Yan (版本), Intelligent Manufacturing and Mechanical Automation - Select Proceedings of the 5th International Conference, MEMAT 2024. Lecture Notes in Mechanical Engineering, Springer Science and Business Media Deutschland GmbH, 页码 187-194, 5th International Conference on Mechanical Engineering, Intelligent Manufacturing and Automation Technology, MEMAT 2024, Nanjing, 中国, 27/12/24. https://doi.org/10.1007/978-981-95-5849-0_19

Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate. / Wu, Chunping; Zhang, Fengshuo; Li, Yongkang 等.
Intelligent Manufacturing and Mechanical Automation - Select Proceedings of the 5th International Conference, MEMAT 2024. 编辑 / Sanjay Yadav; Vikas Narayan Thakur; Pavan Kumar Kankar; Wenjie Chen; Shubin Yan. Springer Science and Business Media Deutschland GmbH, 2026. 页码 187-194 (Lecture Notes in Mechanical Engineering).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate

AU - Wu, Chunping

AU - Zhang, Fengshuo

AU - Li, Yongkang

AU - Zhao, Shiwei

AU - Li, Daochun

N1 - Publisher Copyright: © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2026.

PY - 2026

Y1 - 2026

N2 - This paper takes the wing rib plate beam structure as an object, and its structural response data and the mode shapes are obtained through Abaqus simulation and the NExT-ERA, respectively. The curvature mode change rate, based on curvature mode, is treat as the damage indicator for damage identification of the wing rib plate beam structure, which is firstly identified by the wing rib plate beam without holes as an object, and then by the rib plate beam with holes. The results show that the curvature mode change rate has a good effect on recognizing the damage of the complex wing rib beam structure, which helps to build the wing structural health monitoring system.

AB - This paper takes the wing rib plate beam structure as an object, and its structural response data and the mode shapes are obtained through Abaqus simulation and the NExT-ERA, respectively. The curvature mode change rate, based on curvature mode, is treat as the damage indicator for damage identification of the wing rib plate beam structure, which is firstly identified by the wing rib plate beam without holes as an object, and then by the rib plate beam with holes. The results show that the curvature mode change rate has a good effect on recognizing the damage of the complex wing rib beam structure, which helps to build the wing structural health monitoring system.

KW - Damage identification

KW - The curvature mode change rate

KW - The wing rib plate beam

UR - https://www.scopus.com/pages/publications/105046798809

U2 - 10.1007/978-981-95-5849-0_19

DO - 10.1007/978-981-95-5849-0_19

M3 - 会议稿件

AN - SCOPUS:105046798809

SN - 9789819558483

T3 - Lecture Notes in Mechanical Engineering

SP - 187

EP - 194

BT - Intelligent Manufacturing and Mechanical Automation - Select Proceedings of the 5th International Conference, MEMAT 2024

A2 - Yadav, Sanjay

A2 - Thakur, Vikas Narayan

A2 - Kankar, Pavan Kumar

A2 - Chen, Wenjie

A2 - Yan, Shubin

PB - Springer Science and Business Media Deutschland GmbH

T2 - 5th International Conference on Mechanical Engineering, Intelligent Manufacturing and Automation Technology, MEMAT 2024

Y2 - 27 December 2024 through 29 December 2024

ER -

Wu C, Zhang F, Li Y, Zhao S , Li D. Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate. 在 Yadav S, Thakur VN, Kankar PK, Chen W, Yan S, 编辑, Intelligent Manufacturing and Mechanical Automation - Select Proceedings of the 5th International Conference, MEMAT 2024. Springer Science and Business Media Deutschland GmbH. 2026. 页码 187-194. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-981-95-5849-0_19

Damage Identification of the Wing Rib Plate Beam Based on the Curvature Mode Change Rate

摘要

丛书

会议

访问文件

其它文件与链接

学术指纹

引用此