A Miniaturized Ultrawideband Active Electric Probe with High Sensitivity for Near-Field Measurement

Yang Zhou; Zhaowen Yan; Jianwei Wang; Kunkun Hu; Dongyan Zhao; Yanning Chen; Yang Zhao

doi:10.1109/TIM.2022.3175972

A Miniaturized Ultrawideband Active Electric Probe with High Sensitivity for Near-Field Measurement

Yang Zhou
, Zhaowen Yan^*
, Jianwei Wang^*
, Kunkun Hu
, Dongyan Zhao
, Yanning Chen
, Yang Zhao

^*此作品的通讯作者

电子信息工程学院

Beihang University
Beijing Smart-Chip Microelectronics Technology Co. Ltd.

科研成果: 期刊稿件 › 文章 › 同行评审

22 引用（Scopus）

摘要

A miniaturized ultrawideband active electric probe with high sensitivity for near-field measurement is proposed in this article. The probe is designed with a four-layer printed circuit board (PCB) with mainly two chips, an amplification chip (HMC797APM5E) which can work from dc to 22 GHz and a power management chip (HMC980LP4E). The probe can work from 9 kHz to 18 GHz with 15-dB average gain compared to the passive probe, and the flatness is about ±4 dB in terms of S_21 (transfer factor) from 2.5 to 18 GHz. The maximum size of the probe is 64 mm ×41.5 mm with 1-mm spatial resolution, and the width of the tip is only 4.1 mm, so the probe can handle most test environments. On the whole, the probe is very efficient for near-field measurement to detect weak signals in a wide bandwidth.

源语言	英语
文章编号	8003608
期刊	IEEE Transactions on Instrumentation and Measurement
卷	71
DOI	https://doi.org/10.1109/TIM.2022.3175972
出版状态	已出版 - 2022

访问文件

10.1109/TIM.2022.3175972

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{69989ca7e09a4ce6bf48e7e94487f838,

title = "A Miniaturized Ultrawideband Active Electric Probe with High Sensitivity for Near-Field Measurement",

abstract = "A miniaturized ultrawideband active electric probe with high sensitivity for near-field measurement is proposed in this article. The probe is designed with a four-layer printed circuit board (PCB) with mainly two chips, an amplification chip (HMC797APM5E) which can work from dc to 22 GHz and a power management chip (HMC980LP4E). The probe can work from 9 kHz to 18 GHz with 15-dB average gain compared to the passive probe, and the flatness is about ±4 dB in terms of S\_21 (transfer factor) from 2.5 to 18 GHz. The maximum size of the probe is 64 mm ×41.5 mm with 1-mm spatial resolution, and the width of the tip is only 4.1 mm, so the probe can handle most test environments. On the whole, the probe is very efficient for near-field measurement to detect weak signals in a wide bandwidth.",

keywords = "Active probe, electric, high sensitivity, miniaturized, near-field measurement, ultrawideband",

author = "Yang Zhou and Zhaowen Yan and Jianwei Wang and Kunkun Hu and Dongyan Zhao and Yanning Chen and Yang Zhao",

note = "Publisher Copyright: {\textcopyright} 1963-2012 IEEE.",

year = "2022",

doi = "10.1109/TIM.2022.3175972",

language = "英语",

volume = "71",

journal = "IEEE Transactions on Instrumentation and Measurement",

issn = "0018-9456",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - JOUR

T1 - A Miniaturized Ultrawideband Active Electric Probe with High Sensitivity for Near-Field Measurement

AU - Zhou, Yang

AU - Yan, Zhaowen

AU - Wang, Jianwei

AU - Hu, Kunkun

AU - Zhao, Dongyan

AU - Chen, Yanning

AU - Zhao, Yang

PY - 2022

Y1 - 2022

N2 - A miniaturized ultrawideband active electric probe with high sensitivity for near-field measurement is proposed in this article. The probe is designed with a four-layer printed circuit board (PCB) with mainly two chips, an amplification chip (HMC797APM5E) which can work from dc to 22 GHz and a power management chip (HMC980LP4E). The probe can work from 9 kHz to 18 GHz with 15-dB average gain compared to the passive probe, and the flatness is about ±4 dB in terms of S_21 (transfer factor) from 2.5 to 18 GHz. The maximum size of the probe is 64 mm ×41.5 mm with 1-mm spatial resolution, and the width of the tip is only 4.1 mm, so the probe can handle most test environments. On the whole, the probe is very efficient for near-field measurement to detect weak signals in a wide bandwidth.

AB - A miniaturized ultrawideband active electric probe with high sensitivity for near-field measurement is proposed in this article. The probe is designed with a four-layer printed circuit board (PCB) with mainly two chips, an amplification chip (HMC797APM5E) which can work from dc to 22 GHz and a power management chip (HMC980LP4E). The probe can work from 9 kHz to 18 GHz with 15-dB average gain compared to the passive probe, and the flatness is about ±4 dB in terms of S_21 (transfer factor) from 2.5 to 18 GHz. The maximum size of the probe is 64 mm ×41.5 mm with 1-mm spatial resolution, and the width of the tip is only 4.1 mm, so the probe can handle most test environments. On the whole, the probe is very efficient for near-field measurement to detect weak signals in a wide bandwidth.

KW - Active probe

KW - electric

KW - high sensitivity

KW - miniaturized

KW - near-field measurement

KW - ultrawideband

UR - https://www.scopus.com/pages/publications/85130426728

U2 - 10.1109/TIM.2022.3175972

DO - 10.1109/TIM.2022.3175972

M3 - 文章

AN - SCOPUS:85130426728

SN - 0018-9456

VL - 71

JO - IEEE Transactions on Instrumentation and Measurement

JF - IEEE Transactions on Instrumentation and Measurement

M1 - 8003608

ER -

A Miniaturized Ultrawideband Active Electric Probe with High Sensitivity for Near-Field Measurement

摘要

访问文件

其它文件与链接

指纹

引用此