Three-dimensional turbulent flow field downstream of a single-stage axial compressor rotor

This paper reports an experimental investigation of the three-dimensional turbulent flow downstream of a singlestage axial compressor rotor. The flow fields were measured at two axial locations in the rotor-stator gap at different mass-flow conditions. Both hot-wire probe and fast-response pressure probe were employed to survey the flow structure. At the design condition, substantial flow blockage, turbulence, loss and aerodynamic noise mainly occur in the tip mid-passage, the rotor wake and at the hub comer of the suction surface. The radial component is the highest of the three turbulence intensities at 15% axial chord downstream of the trailing edge. With the flow downstream, the radial turbulence components decay fast. Interactions of the tip leakage vorticities and the rotor wake are found at 30% axial chord downstream of the trailing edge. With the mass-flow decrease, the turbulence intensities and shear stresses become stronger, while the radial components increase fast. The flow separation and tangential migration of the low-energy fluids at the tip comer of the suction surface play an important role in the tip flow field at a low massflow condition.