The microstructure and mechanical properties of C/C composite/Ti                         3                         Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler

Wei Guo; Hongqiang Zhang; Wenqiang Yuan; Yin Zhu; Hua Zhang; Peng Peng; Bojin Qi; Fei Li

doi:10.1016/j.ceramint.2019.01.203

The microstructure and mechanical properties of C/C composite/Ti ₃ Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler

Wei Guo
, Hongqiang Zhang^*
, Wenqiang Yuan
, Yin Zhu
, Hua Zhang
, Peng Peng
, Bojin Qi
, Fei Li

^*Corresponding author for this work

School of Mechanical Engineering and Automation

Beihang University
Beijing Institute of Petrochemical Technology
China Aviation Industry Corporation

Research output: Contribution to journal › Article › peer-review

44 Scopus citations

Abstract

Carbon/carbon (C/C) composite and Ti ₃ Al alloy were brazed using graphene nanoplatelet (GNP) strengthened Ag-Cu-Ti composite filler. The brazed joint had the excellent bonding interface, and the microstructure of joint contained TiC, Ti(Cu,Al), GNPs, AlCu ₂ Ti phases. Results showed that the GNPs addition could decrease the thickness of TiC layer. GNPs hindered the atom diffusion and inhibited the growth of TiCu phase on the Ti ₃ Al alloy side. The shear strength of brazed joint first increased and then decreased with the increase of GNPs content, and the brazed joint reached to the highest shear strength 26.7 MPa when GNPs content was 0.1 wt. %. GNPs could reduce the CTE mismatch between C/C composite and Ti ₃ Al alloy, and improve the joint strength due to the relief of residual stress.

Original language	English
Pages (from-to)	8783-8789
Number of pages	7
Journal	Ceramics International
Volume	45
Issue number	7
DOIs	https://doi.org/10.1016/j.ceramint.2019.01.203
State	Published - May 2019

Keywords

Brazing
Carbon/carbon
Graphene nanoplatelets
Microstructure
Shear strength
Ti Al alloy

Access to Document

10.1016/j.ceramint.2019.01.203

Cite this

Guo, W., Zhang, H., Yuan, W., Zhu, Y., Zhang, H., Peng, P., Qi, B., & Li, F. (2019). The microstructure and mechanical properties of C/C composite/Ti ₃ Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler Ceramics International, 45(7), 8783-8789. https://doi.org/10.1016/j.ceramint.2019.01.203

@article{3f75485e2adc45e59791846be975dafd,

title = " The microstructure and mechanical properties of C/C composite/Ti 3 Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler ",

abstract = " Carbon/carbon (C/C) composite and Ti 3 Al alloy were brazed using graphene nanoplatelet (GNP) strengthened Ag-Cu-Ti composite filler. The brazed joint had the excellent bonding interface, and the microstructure of joint contained TiC, Ti(Cu,Al), GNPs, AlCu 2 Ti phases. Results showed that the GNPs addition could decrease the thickness of TiC layer. GNPs hindered the atom diffusion and inhibited the growth of TiCu phase on the Ti 3 Al alloy side. The shear strength of brazed joint first increased and then decreased with the increase of GNPs content, and the brazed joint reached to the highest shear strength 26.7 MPa when GNPs content was 0.1 wt. \%. GNPs could reduce the CTE mismatch between C/C composite and Ti 3 Al alloy, and improve the joint strength due to the relief of residual stress.",

keywords = "Brazing, Carbon/carbon, Graphene nanoplatelets, Microstructure, Shear strength, Ti Al alloy",

author = "Wei Guo and Hongqiang Zhang and Wenqiang Yuan and Yin Zhu and Hua Zhang and Peng Peng and Bojin Qi and Fei Li",

note = "Publisher Copyright: {\textcopyright} 2019 Elsevier Ltd and Techna Group S.r.l.",

year = "2019",

month = may,

doi = "10.1016/j.ceramint.2019.01.203",

language = "英语",

volume = "45",

pages = "8783--8789",

journal = "Ceramics International",

issn = "0272-8842",

publisher = "Elsevier Ltd",

number = "7",

}

Guo, W, Zhang, H, Yuan, W, Zhu, Y, Zhang, H, Peng, P, Qi, B & Li, F 2019, ' The microstructure and mechanical properties of C/C composite/Ti ₃ Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler ', Ceramics International, vol. 45, no. 7, pp. 8783-8789. https://doi.org/10.1016/j.ceramint.2019.01.203

The microstructure and mechanical properties of C/C composite/Ti ₃ Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler . / Guo, Wei; Zhang, Hongqiang; Yuan, Wenqiang et al.
In: Ceramics International, Vol. 45, No. 7, 05.2019, p. 8783-8789.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - The microstructure and mechanical properties of C/C composite/Ti 3 Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler

AU - Guo, Wei

AU - Zhang, Hongqiang

AU - Yuan, Wenqiang

AU - Zhu, Yin

AU - Zhang, Hua

AU - Peng, Peng

AU - Qi, Bojin

AU - Li, Fei

PY - 2019/5

Y1 - 2019/5

N2 - Carbon/carbon (C/C) composite and Ti 3 Al alloy were brazed using graphene nanoplatelet (GNP) strengthened Ag-Cu-Ti composite filler. The brazed joint had the excellent bonding interface, and the microstructure of joint contained TiC, Ti(Cu,Al), GNPs, AlCu 2 Ti phases. Results showed that the GNPs addition could decrease the thickness of TiC layer. GNPs hindered the atom diffusion and inhibited the growth of TiCu phase on the Ti 3 Al alloy side. The shear strength of brazed joint first increased and then decreased with the increase of GNPs content, and the brazed joint reached to the highest shear strength 26.7 MPa when GNPs content was 0.1 wt. %. GNPs could reduce the CTE mismatch between C/C composite and Ti 3 Al alloy, and improve the joint strength due to the relief of residual stress.

AB - Carbon/carbon (C/C) composite and Ti 3 Al alloy were brazed using graphene nanoplatelet (GNP) strengthened Ag-Cu-Ti composite filler. The brazed joint had the excellent bonding interface, and the microstructure of joint contained TiC, Ti(Cu,Al), GNPs, AlCu 2 Ti phases. Results showed that the GNPs addition could decrease the thickness of TiC layer. GNPs hindered the atom diffusion and inhibited the growth of TiCu phase on the Ti 3 Al alloy side. The shear strength of brazed joint first increased and then decreased with the increase of GNPs content, and the brazed joint reached to the highest shear strength 26.7 MPa when GNPs content was 0.1 wt. %. GNPs could reduce the CTE mismatch between C/C composite and Ti 3 Al alloy, and improve the joint strength due to the relief of residual stress.

KW - Brazing

KW - Carbon/carbon

KW - Graphene nanoplatelets

KW - Microstructure

KW - Shear strength

KW - Ti Al alloy

UR - https://www.scopus.com/pages/publications/85060585991

U2 - 10.1016/j.ceramint.2019.01.203

DO - 10.1016/j.ceramint.2019.01.203

M3 - 文章

AN - SCOPUS:85060585991

SN - 0272-8842

VL - 45

SP - 8783

EP - 8789

JO - Ceramics International

JF - Ceramics International

IS - 7

ER -

Guo W, Zhang H, Yuan W, Zhu Y, Zhang H, Peng P et al. The microstructure and mechanical properties of C/C composite/Ti ₃ Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler Ceramics International. 2019 May;45(7):8783-8789. doi: 10.1016/j.ceramint.2019.01.203

The microstructure and mechanical properties of C/C composite/Ti ₃ Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this