TY - GEN
T1 - The finite element analysis of thermal property of high-speed spindle system in vertical machining center
AU - Sun, Hongmei
AU - Wang, Yanzhong
PY - 2012
Y1 - 2012
N2 - The thermal property of the high-speed spindle system in vertical machining center was studied by using finite element method ( FEM ). When the spindle runs at the speed of 4300r/min, the system reaches the thermal steady state after 17 minutes, the temperature distribution in the spindle was symmetrical, and the highest temperature is in the inner ring the front bearing, with temperature rise of 36.7°C .With the cutting force as load, The calculated result was taken as an input parameter in Abaqus software, the results of which show the thermal deformation of the spindle. The maximum thermal deformation of the spindle is 1.185 × 10 -2mm, on the shoulder, near the edge of the cutter.
AB - The thermal property of the high-speed spindle system in vertical machining center was studied by using finite element method ( FEM ). When the spindle runs at the speed of 4300r/min, the system reaches the thermal steady state after 17 minutes, the temperature distribution in the spindle was symmetrical, and the highest temperature is in the inner ring the front bearing, with temperature rise of 36.7°C .With the cutting force as load, The calculated result was taken as an input parameter in Abaqus software, the results of which show the thermal deformation of the spindle. The maximum thermal deformation of the spindle is 1.185 × 10 -2mm, on the shoulder, near the edge of the cutter.
KW - Bearing
KW - Cutting forc
KW - Finite element method
KW - Spindle
KW - Thermal property
UR - https://www.scopus.com/pages/publications/84862955264
U2 - 10.4028/www.scientific.net/AMR.433-440.567
DO - 10.4028/www.scientific.net/AMR.433-440.567
M3 - 会议稿件
AN - SCOPUS:84862955264
SN - 9783037853191
T3 - Advanced Materials Research
SP - 567
EP - 571
BT - Materials Science and Information Technology, MSIT2011
T2 - 2011 International Conference on Material Science and Information Technology, MSIT2011
Y2 - 16 September 2011 through 18 September 2011
ER -