The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber

Jiakai Wei; Wenpeng Han; Wuxiang Zhang; Xilun Ding

doi:10.1007/978-981-19-9398-5_41

The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber

Jiakai Wei
, Wenpeng Han
, Wuxiang Zhang^*
, Xilun Ding

^*Corresponding author for this work

School of Mechanical Engineering and Automation

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The three-dimensional fabric fabricated by three-dimensional braiding technology can remedy the defects of poor interlayer bonding of continuous fiber reinforced polymer composites, but the traditional three-dimensional braiding machines are not applicable for the braiding of small special-shaped structures. Therefore, a small aperture braiding technology based on truss structure is proposed in this paper, which can fabricate small special-shaped structures. Firstly, based on 3D printing continuous fiber reinforced polymer technology and 3D braiding technology, this paper given definitely basic project for solving problem and integrated techniques flow. Then, according to the size of the required braided structure and referring to the cable-driven interventional catheter technology applied to the treatment of cardiovascular diseases, the principle of 3D braiding technology is introduced and the structural design of 3D braiding head is completed. Finally, according to different fabric structures, the trajectory planning of each braiding mechanism is realized, and their simulated motions are imitated by the software of Adams to obtain motion trajectory figures.

Original language	English
Title of host publication	Advances in Mechanism, Machine Science and Engineering in China - Proceedings of IFToMM CCMMS 2022
Editors	Xinjun Liu
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	699-708
Number of pages	10
ISBN (Print)	9789811993978
DOIs	https://doi.org/10.1007/978-981-19-9398-5_41
State	Published - 2023
Event	23rd IFToMM China International Conference on Mechanism and Machine Science and Engineering, IFToMM CCMMS 2022 - Yantai, China Duration: 30 Jul 2022 → 1 Aug 2022

Publication series

Name	Lecture Notes in Mechanical Engineering
ISSN (Print)	2195-4356
ISSN (Electronic)	2195-4364

Conference

Conference	23rd IFToMM China International Conference on Mechanism and Machine Science and Engineering, IFToMM CCMMS 2022
Country/Territory	China
City	Yantai
Period	30/07/22 → 1/08/22

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 3 Good Health and Well-being

Keywords

3Dbraiding mechanisim
Continuous fiber reinforced thermoplastic composites
Dynamic simulation
Trajectory planning

Access to Document

10.1007/978-981-19-9398-5_41

Cite this

Wei, J., Han, W., Zhang, W., & Ding, X. (2023). The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber. In X. Liu (Ed.), Advances in Mechanism, Machine Science and Engineering in China - Proceedings of IFToMM CCMMS 2022 (pp. 699-708). (Lecture Notes in Mechanical Engineering). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-19-9398-5_41

Wei, Jiakai ; Han, Wenpeng ; Zhang, Wuxiang et al. / The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber. Advances in Mechanism, Machine Science and Engineering in China - Proceedings of IFToMM CCMMS 2022. editor / Xinjun Liu. Springer Science and Business Media Deutschland GmbH, 2023. pp. 699-708 (Lecture Notes in Mechanical Engineering).

@inproceedings{a5adeb2a08634295b01621b668434883,

title = "The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber",

abstract = "The three-dimensional fabric fabricated by three-dimensional braiding technology can remedy the defects of poor interlayer bonding of continuous fiber reinforced polymer composites, but the traditional three-dimensional braiding machines are not applicable for the braiding of small special-shaped structures. Therefore, a small aperture braiding technology based on truss structure is proposed in this paper, which can fabricate small special-shaped structures. Firstly, based on 3D printing continuous fiber reinforced polymer technology and 3D braiding technology, this paper given definitely basic project for solving problem and integrated techniques flow. Then, according to the size of the required braided structure and referring to the cable-driven interventional catheter technology applied to the treatment of cardiovascular diseases, the principle of 3D braiding technology is introduced and the structural design of 3D braiding head is completed. Finally, according to different fabric structures, the trajectory planning of each braiding mechanism is realized, and their simulated motions are imitated by the software of Adams to obtain motion trajectory figures.",

keywords = "3Dbraiding mechanisim, Continuous fiber reinforced thermoplastic composites, Dynamic simulation, Trajectory planning",

author = "Jiakai Wei and Wenpeng Han and Wuxiang Zhang and Xilun Ding",

note = "Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.; 23rd IFToMM China International Conference on Mechanism and Machine Science and Engineering, IFToMM CCMMS 2022 ; Conference date: 30-07-2022 Through 01-08-2022",

year = "2023",

doi = "10.1007/978-981-19-9398-5\_41",

language = "英语",

isbn = "9789811993978",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "699--708",

editor = "Xinjun Liu",

booktitle = "Advances in Mechanism, Machine Science and Engineering in China - Proceedings of IFToMM CCMMS 2022",

address = "德国",

}

Wei, J, Han, W, Zhang, W & Ding, X 2023, The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber. in X Liu (ed.), Advances in Mechanism, Machine Science and Engineering in China - Proceedings of IFToMM CCMMS 2022. Lecture Notes in Mechanical Engineering, Springer Science and Business Media Deutschland GmbH, pp. 699-708, 23rd IFToMM China International Conference on Mechanism and Machine Science and Engineering, IFToMM CCMMS 2022, Yantai, China, 30/07/22. https://doi.org/10.1007/978-981-19-9398-5_41

The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber. / Wei, Jiakai; Han, Wenpeng; Zhang, Wuxiang et al.
Advances in Mechanism, Machine Science and Engineering in China - Proceedings of IFToMM CCMMS 2022. ed. / Xinjun Liu. Springer Science and Business Media Deutschland GmbH, 2023. p. 699-708 (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber

AU - Wei, Jiakai

AU - Han, Wenpeng

AU - Zhang, Wuxiang

AU - Ding, Xilun

PY - 2023

Y1 - 2023

N2 - The three-dimensional fabric fabricated by three-dimensional braiding technology can remedy the defects of poor interlayer bonding of continuous fiber reinforced polymer composites, but the traditional three-dimensional braiding machines are not applicable for the braiding of small special-shaped structures. Therefore, a small aperture braiding technology based on truss structure is proposed in this paper, which can fabricate small special-shaped structures. Firstly, based on 3D printing continuous fiber reinforced polymer technology and 3D braiding technology, this paper given definitely basic project for solving problem and integrated techniques flow. Then, according to the size of the required braided structure and referring to the cable-driven interventional catheter technology applied to the treatment of cardiovascular diseases, the principle of 3D braiding technology is introduced and the structural design of 3D braiding head is completed. Finally, according to different fabric structures, the trajectory planning of each braiding mechanism is realized, and their simulated motions are imitated by the software of Adams to obtain motion trajectory figures.

AB - The three-dimensional fabric fabricated by three-dimensional braiding technology can remedy the defects of poor interlayer bonding of continuous fiber reinforced polymer composites, but the traditional three-dimensional braiding machines are not applicable for the braiding of small special-shaped structures. Therefore, a small aperture braiding technology based on truss structure is proposed in this paper, which can fabricate small special-shaped structures. Firstly, based on 3D printing continuous fiber reinforced polymer technology and 3D braiding technology, this paper given definitely basic project for solving problem and integrated techniques flow. Then, according to the size of the required braided structure and referring to the cable-driven interventional catheter technology applied to the treatment of cardiovascular diseases, the principle of 3D braiding technology is introduced and the structural design of 3D braiding head is completed. Finally, according to different fabric structures, the trajectory planning of each braiding mechanism is realized, and their simulated motions are imitated by the software of Adams to obtain motion trajectory figures.

KW - 3Dbraiding mechanisim

KW - Continuous fiber reinforced thermoplastic composites

KW - Dynamic simulation

KW - Trajectory planning

UR - https://www.scopus.com/pages/publications/85164028465

U2 - 10.1007/978-981-19-9398-5_41

DO - 10.1007/978-981-19-9398-5_41

M3 - 会议稿件

AN - SCOPUS:85164028465

SN - 9789811993978

T3 - Lecture Notes in Mechanical Engineering

SP - 699

EP - 708

BT - Advances in Mechanism, Machine Science and Engineering in China - Proceedings of IFToMM CCMMS 2022

A2 - Liu, Xinjun

PB - Springer Science and Business Media Deutschland GmbH

T2 - 23rd IFToMM China International Conference on Mechanism and Machine Science and Engineering, IFToMM CCMMS 2022

Y2 - 30 July 2022 through 1 August 2022

ER -

Wei J, Han W, Zhang W , Ding X. The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber. In Liu X, editor, Advances in Mechanism, Machine Science and Engineering in China - Proceedings of IFToMM CCMMS 2022. Springer Science and Business Media Deutschland GmbH. 2023. p. 699-708. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-981-19-9398-5_41

The Design and Analysis of 3D Braiding Mechanism Based on a Small-Size Additive Manufacturing Technology Reinforced by Continuous Fiber

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this