Study on simulation and control of dryspot defect For RTM processing

Yue Xin Duan; Fu Jun Yao; Zuo Guang Zhang

Study on simulation and control of dryspot defect For RTM processing

Yue Xin Duan^*
, Fu Jun Yao
, Zuo Guang Zhang

^*Corresponding author for this work

School of Materials Science and Engineering

Beihang University

Research output: Contribution to journal › Article › peer-review

Abstract

RTM filling process of a composite part was simulated in 3D using the simulation system. This system was developed by BUAA independently. After analysis of the simulation results, the optimal injection way was set and reasonable vents were settled. Furthermore, the methods to remove the dryspot of the part were studied particularly. This gives an instruction to the process optimization.

Original language	English
Pages (from-to)	285-289
Number of pages	5
Journal	Journal of Materials Engineering
Issue number	SUPPL.
State	Published - Jul 2006

Keywords

Composites
Dryspot
RTM
Simulation

Cite this

@article{e9ffe9f4952345478effeac3f516f733,

title = "Study on simulation and control of dryspot defect For RTM processing",

abstract = "RTM filling process of a composite part was simulated in 3D using the simulation system. This system was developed by BUAA independently. After analysis of the simulation results, the optimal injection way was set and reasonable vents were settled. Furthermore, the methods to remove the dryspot of the part were studied particularly. This gives an instruction to the process optimization.",

keywords = "Composites, Dryspot, RTM, Simulation",

author = "Duan, \{Yue Xin\} and Yao, \{Fu Jun\} and Zhang, \{Zuo Guang\}",

year = "2006",

month = jul,

language = "英语",

pages = "285--289",

journal = "Journal of Materials Engineering",

issn = "1001-4381",

publisher = "Science Press ",

number = "SUPPL.",

}

TY - JOUR

T1 - Study on simulation and control of dryspot defect For RTM processing

AU - Duan, Yue Xin

AU - Yao, Fu Jun

AU - Zhang, Zuo Guang

PY - 2006/7

Y1 - 2006/7

N2 - RTM filling process of a composite part was simulated in 3D using the simulation system. This system was developed by BUAA independently. After analysis of the simulation results, the optimal injection way was set and reasonable vents were settled. Furthermore, the methods to remove the dryspot of the part were studied particularly. This gives an instruction to the process optimization.

AB - RTM filling process of a composite part was simulated in 3D using the simulation system. This system was developed by BUAA independently. After analysis of the simulation results, the optimal injection way was set and reasonable vents were settled. Furthermore, the methods to remove the dryspot of the part were studied particularly. This gives an instruction to the process optimization.

KW - Composites

KW - Dryspot

KW - RTM

KW - Simulation

UR - https://www.scopus.com/pages/publications/33746789833

M3 - 文章

AN - SCOPUS:33746789833

SN - 1001-4381

SP - 285

EP - 289

JO - Journal of Materials Engineering

JF - Journal of Materials Engineering

IS - SUPPL.

ER -

Study on simulation and control of dryspot defect For RTM processing

Abstract

Keywords

Other files and links

Fingerprint

Cite this