Slurry Seal and Micro-surfacing

Feng Li; Jinyan Feng; Youxin Li; Siqi Zhou

doi:10.1007/978-981-15-6206-8_6

Slurry Seal and Micro-surfacing

Feng Li^*
, Jinyan Feng
, Youxin Li
, Siqi Zhou

^*Corresponding author for this work

School of Transportation Science and Engineering

Beihang University

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

Abstract

The slurry seal uses a slurry seal paver to spread the emulsified asphalt, coarse and fine aggregates, fillers, water, and additives according to the design ratio into a thin layer technology that is spread on the original road surface. It has construction Fast, low cost, wide use, low energy consumption and so on. The micro-surfacing is an upgraded version of the slurry seal technology. The two technologies are similar, but the equipment and material requirements at the micro-surfacing are higher than the slurry seal, and its performance is also better than the slurry seal. This chapter mainly introduces the materials, design, construction, quality inspection and acceptance of the slurry seal and micro-surfacing.

Original language	English
Title of host publication	Springer Tracts on Transportation and Traffic
Publisher	Springer
Pages	87-101
Number of pages	15
DOIs	https://doi.org/10.1007/978-981-15-6206-8_6
State	Published - 2021

Publication series

Name	Springer Tracts on Transportation and Traffic
Volume	16
ISSN (Print)	2194-8119
ISSN (Electronic)	2194-8127

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy
SDG 11 Sustainable Cities and Communities

Keywords

Construction
Construction procedure
Material
Micro-surfacing
Quality inspection and acceptance
Slurry seal

Access to Document

10.1007/978-981-15-6206-8_6

Cite this

@inbook{bcc3d59c884c473fb312aea164c082c6,

title = "Slurry Seal and Micro-surfacing",

abstract = "The slurry seal uses a slurry seal paver to spread the emulsified asphalt, coarse and fine aggregates, fillers, water, and additives according to the design ratio into a thin layer technology that is spread on the original road surface. It has construction Fast, low cost, wide use, low energy consumption and so on. The micro-surfacing is an upgraded version of the slurry seal technology. The two technologies are similar, but the equipment and material requirements at the micro-surfacing are higher than the slurry seal, and its performance is also better than the slurry seal. This chapter mainly introduces the materials, design, construction, quality inspection and acceptance of the slurry seal and micro-surfacing.",

keywords = "Construction, Construction procedure, Material, Micro-surfacing, Quality inspection and acceptance, Slurry seal",

author = "Feng Li and Jinyan Feng and Youxin Li and Siqi Zhou",

note = "Publisher Copyright: {\textcopyright} 2021, Springer Nature Singapore Pte Ltd.",

year = "2021",

doi = "10.1007/978-981-15-6206-8\_6",

language = "英语",

series = "Springer Tracts on Transportation and Traffic",

publisher = "Springer",

pages = "87--101",

booktitle = "Springer Tracts on Transportation and Traffic",

address = "德国",

}

TY - CHAP

T1 - Slurry Seal and Micro-surfacing

AU - Li, Feng

AU - Feng, Jinyan

AU - Li, Youxin

AU - Zhou, Siqi

PY - 2021

Y1 - 2021

N2 - The slurry seal uses a slurry seal paver to spread the emulsified asphalt, coarse and fine aggregates, fillers, water, and additives according to the design ratio into a thin layer technology that is spread on the original road surface. It has construction Fast, low cost, wide use, low energy consumption and so on. The micro-surfacing is an upgraded version of the slurry seal technology. The two technologies are similar, but the equipment and material requirements at the micro-surfacing are higher than the slurry seal, and its performance is also better than the slurry seal. This chapter mainly introduces the materials, design, construction, quality inspection and acceptance of the slurry seal and micro-surfacing.

AB - The slurry seal uses a slurry seal paver to spread the emulsified asphalt, coarse and fine aggregates, fillers, water, and additives according to the design ratio into a thin layer technology that is spread on the original road surface. It has construction Fast, low cost, wide use, low energy consumption and so on. The micro-surfacing is an upgraded version of the slurry seal technology. The two technologies are similar, but the equipment and material requirements at the micro-surfacing are higher than the slurry seal, and its performance is also better than the slurry seal. This chapter mainly introduces the materials, design, construction, quality inspection and acceptance of the slurry seal and micro-surfacing.

KW - Construction

KW - Construction procedure

KW - Material

KW - Micro-surfacing

KW - Quality inspection and acceptance

KW - Slurry seal

UR - https://www.scopus.com/pages/publications/85087554423

U2 - 10.1007/978-981-15-6206-8_6

DO - 10.1007/978-981-15-6206-8_6

M3 - 章节

AN - SCOPUS:85087554423

T3 - Springer Tracts on Transportation and Traffic

SP - 87

EP - 101

BT - Springer Tracts on Transportation and Traffic

PB - Springer

ER -

Slurry Seal and Micro-surfacing

Abstract

Publication series

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this