Research on method of 5-axis NC rough machining of turbine blade

Kang Li; Lian Shui Guo

Research on method of 5-axis NC rough machining of turbine blade

Kang Li^*
, Lian Shui Guo

^*Corresponding author for this work

School of Mechanical Engineering and Automation

Beihang University

Research output: Contribution to journal › Article › peer-review

7 Scopus citations

Abstract

In order to improve the quality and efficiency of turbine milling, the fiank milling is a good method, especially for rough milling. This article provides a whole solution that is wrapping the sculptured-surface by multiple ruled surfaces, including optimized arithmetic and application. NC programming by UG and simulating and analyzing by VERICUT, the results indicate that the segmental flank milling can give much better quality and greater efficiency than the traditional manufacturing method.

Original language	English
Pages (from-to)	505-508
Number of pages	4
Journal	Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica
Volume	27
Issue number	3
State	Published - May 2006

Keywords

Flank-milling
Multi-axis machining
Rough-optimization
Ruled-surface
Turbine blade

Cite this

@article{8f8c5711a7a444f58aac42bbb7718ce5,

title = "Research on method of 5-axis NC rough machining of turbine blade",

abstract = "In order to improve the quality and efficiency of turbine milling, the fiank milling is a good method, especially for rough milling. This article provides a whole solution that is wrapping the sculptured-surface by multiple ruled surfaces, including optimized arithmetic and application. NC programming by UG and simulating and analyzing by VERICUT, the results indicate that the segmental flank milling can give much better quality and greater efficiency than the traditional manufacturing method.",

keywords = "Flank-milling, Multi-axis machining, Rough-optimization, Ruled-surface, Turbine blade",

author = "Kang Li and Guo, \{Lian Shui\}",

year = "2006",

month = may,

language = "英语",

volume = "27",

pages = "505--508",

journal = "Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica",

issn = "1000-6893",

publisher = "Chinese Society of Astronautics",

number = "3",

}

TY - JOUR

T1 - Research on method of 5-axis NC rough machining of turbine blade

AU - Li, Kang

AU - Guo, Lian Shui

PY - 2006/5

Y1 - 2006/5

N2 - In order to improve the quality and efficiency of turbine milling, the fiank milling is a good method, especially for rough milling. This article provides a whole solution that is wrapping the sculptured-surface by multiple ruled surfaces, including optimized arithmetic and application. NC programming by UG and simulating and analyzing by VERICUT, the results indicate that the segmental flank milling can give much better quality and greater efficiency than the traditional manufacturing method.

AB - In order to improve the quality and efficiency of turbine milling, the fiank milling is a good method, especially for rough milling. This article provides a whole solution that is wrapping the sculptured-surface by multiple ruled surfaces, including optimized arithmetic and application. NC programming by UG and simulating and analyzing by VERICUT, the results indicate that the segmental flank milling can give much better quality and greater efficiency than the traditional manufacturing method.

KW - Flank-milling

KW - Multi-axis machining

KW - Rough-optimization

KW - Ruled-surface

KW - Turbine blade

UR - https://www.scopus.com/pages/publications/33745941004

M3 - 文章

AN - SCOPUS:33745941004

SN - 1000-6893

VL - 27

SP - 505

EP - 508

JO - Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica

JF - Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica

IS - 3

ER -

Research on method of 5-axis NC rough machining of turbine blade

Abstract

Keywords

Other files and links

Fingerprint

Cite this