Research on Machining Allowance Distribution Optimization based on Processing Defect Risk

Xiaonan Wu; Wei Dai

doi:10.1016/j.procir.2016.10.099

Research on Machining Allowance Distribution Optimization based on Processing Defect Risk

Xiaonan Wu
, Wei Dai^*

^*Corresponding author for this work

School of Reliability and Systems Engineering

Beihang University

Research output: Contribution to journal › Conference article › peer-review

7 Scopus citations

Abstract

It is necessary to control every key process to make sure the output quality of final product is stability. Because there existing many fluctuating factors during multistage manufacturing processes, it is inevitable lead to numerous manufacturing defects, which would make the quality of final product at risk. In this paper, a model about processing defect risk was proposed to measure the quality of products, which was associated with multistage machining allowance. Then, it was used to optimize machining allowance distribution program of multistage manufacturing process. A machining example of slide valve & sleeve matching parts was presented to verify the rationality of this model.

Original language	English
Pages (from-to)	508-511
Number of pages	4
Journal	Procedia CIRP
Volume	56
DOIs	https://doi.org/10.1016/j.procir.2016.10.099
State	Published - 2016
Event	9th International Conference on Digital Enterprise Technology - Intelligent Manufacturing in the Knowledge Economy Era, DET 2016 - Nanjing, China Duration: 29 Mar 2016 → 31 Mar 2016

Keywords

Defect risk
Machining allowance
Multistage manufacturing process
Process optimization

Access to Document

10.1016/j.procir.2016.10.099

Cite this

@article{0e47758d8d3e44149a4e17a5ab01b6d0,

title = "Research on Machining Allowance Distribution Optimization based on Processing Defect Risk",

abstract = "It is necessary to control every key process to make sure the output quality of final product is stability. Because there existing many fluctuating factors during multistage manufacturing processes, it is inevitable lead to numerous manufacturing defects, which would make the quality of final product at risk. In this paper, a model about processing defect risk was proposed to measure the quality of products, which was associated with multistage machining allowance. Then, it was used to optimize machining allowance distribution program of multistage manufacturing process. A machining example of slide valve \& sleeve matching parts was presented to verify the rationality of this model.",

keywords = "Defect risk, Machining allowance, Multistage manufacturing process, Process optimization",

author = "Xiaonan Wu and Wei Dai",

note = "Publisher Copyright: {\textcopyright} 2016 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license.; 9th International Conference on Digital Enterprise Technology - Intelligent Manufacturing in the Knowledge Economy Era, DET 2016 ; Conference date: 29-03-2016 Through 31-03-2016",

year = "2016",

doi = "10.1016/j.procir.2016.10.099",

language = "英语",

volume = "56",

pages = "508--511",

journal = "Procedia CIRP",

issn = "2212-8271",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Research on Machining Allowance Distribution Optimization based on Processing Defect Risk

AU - Wu, Xiaonan

AU - Dai, Wei

PY - 2016

Y1 - 2016

N2 - It is necessary to control every key process to make sure the output quality of final product is stability. Because there existing many fluctuating factors during multistage manufacturing processes, it is inevitable lead to numerous manufacturing defects, which would make the quality of final product at risk. In this paper, a model about processing defect risk was proposed to measure the quality of products, which was associated with multistage machining allowance. Then, it was used to optimize machining allowance distribution program of multistage manufacturing process. A machining example of slide valve & sleeve matching parts was presented to verify the rationality of this model.

AB - It is necessary to control every key process to make sure the output quality of final product is stability. Because there existing many fluctuating factors during multistage manufacturing processes, it is inevitable lead to numerous manufacturing defects, which would make the quality of final product at risk. In this paper, a model about processing defect risk was proposed to measure the quality of products, which was associated with multistage machining allowance. Then, it was used to optimize machining allowance distribution program of multistage manufacturing process. A machining example of slide valve & sleeve matching parts was presented to verify the rationality of this model.

KW - Defect risk

KW - Machining allowance

KW - Multistage manufacturing process

KW - Process optimization

UR - https://www.scopus.com/pages/publications/85006966089

U2 - 10.1016/j.procir.2016.10.099

DO - 10.1016/j.procir.2016.10.099

M3 - 会议文章

AN - SCOPUS:85006966089

SN - 2212-8271

VL - 56

SP - 508

EP - 511

JO - Procedia CIRP

JF - Procedia CIRP

T2 - 9th International Conference on Digital Enterprise Technology - Intelligent Manufacturing in the Knowledge Economy Era, DET 2016

Y2 - 29 March 2016 through 31 March 2016

ER -

Research on Machining Allowance Distribution Optimization based on Processing Defect Risk

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this