Reflected-light-source-based three-dimensional display with high brightness

Guo Jiao Lv; Fei Wu; Wu Xiang Zhao; Jun Fan; Bai Chuan Zhao; Qiong Hua Wang

doi:10.1364/AO.55.003452

Reflected-light-source-based three-dimensional display with high brightness

Guo Jiao Lv
, Fei Wu
, Wu Xiang Zhao
, Jun Fan
, Bai Chuan Zhao
, Qiong Hua Wang^*

^*Corresponding author for this work

Chengdu Technological University
Sichuan University

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

Abstract

A reflected-light-source (RLS)-based 3D display is proposed. This display consists of an RLS and a 2D display panel. The 2D display panel is located in front of the RLS. The RLS consists of a light source, a light guide plate (LGP), and a reflection cavity. The light source and the LGP are located in the reflection cavity. Light from the light source can enter into the LGP and reflect continuously in the reflection cavity. The reflection cavity has a series of slits, and light can exit only from these slits. These slits can work as a postpositional parallax barrier, so when they modulate the parallax images on the 2D display, 3D images are formed. Different from the conventional 3D display based on a parallax barrier, this RLS has less optical loss, so it can provide higher brightness. A prototype of this display is developed. Experimental results show that this RLS-based 3D display can provide higher brightness than the conventional one.

Original language	English
Pages (from-to)	3452-3455
Number of pages	4
Journal	Applied Optics
Volume	55
Issue number	13
DOIs	https://doi.org/10.1364/AO.55.003452
State	Published - 1 May 2016
Externally published	Yes

Access to Document

10.1364/AO.55.003452

Cite this

@article{744550c84dbc4f86b5bbff1032fa9790,

title = "Reflected-light-source-based three-dimensional display with high brightness",

abstract = "A reflected-light-source (RLS)-based 3D display is proposed. This display consists of an RLS and a 2D display panel. The 2D display panel is located in front of the RLS. The RLS consists of a light source, a light guide plate (LGP), and a reflection cavity. The light source and the LGP are located in the reflection cavity. Light from the light source can enter into the LGP and reflect continuously in the reflection cavity. The reflection cavity has a series of slits, and light can exit only from these slits. These slits can work as a postpositional parallax barrier, so when they modulate the parallax images on the 2D display, 3D images are formed. Different from the conventional 3D display based on a parallax barrier, this RLS has less optical loss, so it can provide higher brightness. A prototype of this display is developed. Experimental results show that this RLS-based 3D display can provide higher brightness than the conventional one.",

author = "Lv, \{Guo Jiao\} and Fei Wu and Zhao, \{Wu Xiang\} and Jun Fan and Zhao, \{Bai Chuan\} and Wang, \{Qiong Hua\}",

note = "Publisher Copyright: {\textcopyright} 2016 Optical Society of America.",

year = "2016",

month = may,

day = "1",

doi = "10.1364/AO.55.003452",

language = "英语",

volume = "55",

pages = "3452--3455",

journal = "Applied Optics",

issn = "1559-128X",

publisher = "Optica Publishing Group (formerly OSA)",

number = "13",

}

TY - JOUR

T1 - Reflected-light-source-based three-dimensional display with high brightness

AU - Lv, Guo Jiao

AU - Wu, Fei

AU - Zhao, Wu Xiang

AU - Fan, Jun

AU - Zhao, Bai Chuan

AU - Wang, Qiong Hua

PY - 2016/5/1

Y1 - 2016/5/1

N2 - A reflected-light-source (RLS)-based 3D display is proposed. This display consists of an RLS and a 2D display panel. The 2D display panel is located in front of the RLS. The RLS consists of a light source, a light guide plate (LGP), and a reflection cavity. The light source and the LGP are located in the reflection cavity. Light from the light source can enter into the LGP and reflect continuously in the reflection cavity. The reflection cavity has a series of slits, and light can exit only from these slits. These slits can work as a postpositional parallax barrier, so when they modulate the parallax images on the 2D display, 3D images are formed. Different from the conventional 3D display based on a parallax barrier, this RLS has less optical loss, so it can provide higher brightness. A prototype of this display is developed. Experimental results show that this RLS-based 3D display can provide higher brightness than the conventional one.

AB - A reflected-light-source (RLS)-based 3D display is proposed. This display consists of an RLS and a 2D display panel. The 2D display panel is located in front of the RLS. The RLS consists of a light source, a light guide plate (LGP), and a reflection cavity. The light source and the LGP are located in the reflection cavity. Light from the light source can enter into the LGP and reflect continuously in the reflection cavity. The reflection cavity has a series of slits, and light can exit only from these slits. These slits can work as a postpositional parallax barrier, so when they modulate the parallax images on the 2D display, 3D images are formed. Different from the conventional 3D display based on a parallax barrier, this RLS has less optical loss, so it can provide higher brightness. A prototype of this display is developed. Experimental results show that this RLS-based 3D display can provide higher brightness than the conventional one.

UR - https://www.scopus.com/pages/publications/84966350738

U2 - 10.1364/AO.55.003452

DO - 10.1364/AO.55.003452

M3 - 文章

AN - SCOPUS:84966350738

SN - 1559-128X

VL - 55

SP - 3452

EP - 3455

JO - Applied Optics

JF - Applied Optics

IS - 13

ER -

Reflected-light-source-based three-dimensional display with high brightness

Abstract

Access to Document

Other files and links

Fingerprint

Cite this