Recycling and reusing of nonmetal materials from waste printed circuit boards

Zhi Gang Shen; Chu Jiang Cai; Yu Shan Xing; Shu Lin Ma

Recycling and reusing of nonmetal materials from waste printed circuit boards

Zhi Gang Shen^*
, Chu Jiang Cai
, Yu Shan Xing
, Shu Lin Ma

^*Corresponding author for this work

School of Aeronautic Science and Engineering

Beihang University

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

A physical method was used in recycling of waste printed circuit boards (PCB). The feasibility of the nonmetal materials to be used in polypropylene (PP) composites as filler was studied and mechanical properties of the composite material were analyzed in the experiment. The result shows that when nonmetal powders reclaimed from waste PCB, finer than 300 meshes, were filled in PP, such mechanical properties of PP composites as the flexural modulus, flexural strength and tensile strength increase by 143%, 69% and 59% respectively. Therefore, filling nonmetal powders reclaimed from waste PCB in PP composites is a feasible way to reuse waste PCB.

Original language	English
Pages (from-to)	59-62
Number of pages	4
Journal	Huaxue Gongcheng/Chemical Engineering (China)
Volume	34
Issue number	10
State	Published - Oct 2006

Keywords

Filler
Nonmetal materials
Recycling
Waste printed circuit boards (PCB )

Cite this

@article{5f5183cc28574bd6bbce1c3de9fcd868,

title = "Recycling and reusing of nonmetal materials from waste printed circuit boards",

abstract = "A physical method was used in recycling of waste printed circuit boards (PCB). The feasibility of the nonmetal materials to be used in polypropylene (PP) composites as filler was studied and mechanical properties of the composite material were analyzed in the experiment. The result shows that when nonmetal powders reclaimed from waste PCB, finer than 300 meshes, were filled in PP, such mechanical properties of PP composites as the flexural modulus, flexural strength and tensile strength increase by 143\%, 69\% and 59\% respectively. Therefore, filling nonmetal powders reclaimed from waste PCB in PP composites is a feasible way to reuse waste PCB.",

keywords = "Filler, Nonmetal materials, Recycling, Waste printed circuit boards (PCB )",

author = "Shen, \{Zhi Gang\} and Cai, \{Chu Jiang\} and Xing, \{Yu Shan\} and Ma, \{Shu Lin\}",

year = "2006",

month = oct,

language = "英语",

volume = "34",

pages = "59--62",

journal = "Huaxue Gongcheng/Chemical Engineering (China)",

issn = "1005-9954",

publisher = "Editorial Office of Chemical Engineering (China)",

number = "10",

}

TY - JOUR

T1 - Recycling and reusing of nonmetal materials from waste printed circuit boards

AU - Shen, Zhi Gang

AU - Cai, Chu Jiang

AU - Xing, Yu Shan

AU - Ma, Shu Lin

PY - 2006/10

Y1 - 2006/10

N2 - A physical method was used in recycling of waste printed circuit boards (PCB). The feasibility of the nonmetal materials to be used in polypropylene (PP) composites as filler was studied and mechanical properties of the composite material were analyzed in the experiment. The result shows that when nonmetal powders reclaimed from waste PCB, finer than 300 meshes, were filled in PP, such mechanical properties of PP composites as the flexural modulus, flexural strength and tensile strength increase by 143%, 69% and 59% respectively. Therefore, filling nonmetal powders reclaimed from waste PCB in PP composites is a feasible way to reuse waste PCB.

AB - A physical method was used in recycling of waste printed circuit boards (PCB). The feasibility of the nonmetal materials to be used in polypropylene (PP) composites as filler was studied and mechanical properties of the composite material were analyzed in the experiment. The result shows that when nonmetal powders reclaimed from waste PCB, finer than 300 meshes, were filled in PP, such mechanical properties of PP composites as the flexural modulus, flexural strength and tensile strength increase by 143%, 69% and 59% respectively. Therefore, filling nonmetal powders reclaimed from waste PCB in PP composites is a feasible way to reuse waste PCB.

KW - Filler

KW - Nonmetal materials

KW - Recycling

KW - Waste printed circuit boards (PCB )

UR - https://www.scopus.com/pages/publications/33845888832

M3 - 文章

AN - SCOPUS:33845888832

SN - 1005-9954

VL - 34

SP - 59

EP - 62

JO - Huaxue Gongcheng/Chemical Engineering (China)

JF - Huaxue Gongcheng/Chemical Engineering (China)

IS - 10

ER -

Recycling and reusing of nonmetal materials from waste printed circuit boards

Abstract

Keywords

Other files and links

Fingerprint

Cite this