Power-Hardware-in-the-Loop Based Induction Motor Emulator with Rotor Cage Fault

Yupeng Liu; Chigozie Boniface; Paul Barendse; Pragasen Pillay

doi:10.1109/ECCE50734.2022.9947658

Power-Hardware-in-the-Loop Based Induction Motor Emulator with Rotor Cage Fault

Yupeng Liu
, Chigozie Boniface
, Paul Barendse
, Pragasen Pillay

Concordia University
University of Cape Town

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

The induction machine (IM) is commonly adopted in industry, which plays an important role in energy conversion between mechanical and electrical power. Asymmetrical faults caused by internal failures commonly occur in IMs. Such faults not only reduce the working efficiency and cause excessive heating, but also cause potential hazards preventing continuous operation and safety problems. This paper proposes a power electronic converter-based IM power hardware-in-the-loop (PHIL) emulator, which is able to emulate an IM with internal faults. Firstly, the machine parameter measurement method for an induction motor with a rotor cage fault is introduced. Then the rotor cage fault machine is identified by using stator current spectral components. Based on that, the PHIL emulator is developed and tested for an IM with rotor cage fault. A comparison of the emulator results with simulation results and actual IM results demonstrates the validity of proposed solution.

Original language	English
Title of host publication	2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781728193878
DOIs	https://doi.org/10.1109/ECCE50734.2022.9947658
State	Published - 2022
Externally published	Yes
Event	2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022 - Detroit, United States Duration: 9 Oct 2022 → 13 Oct 2022

Publication series

Name	2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022

Conference

Conference	2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022
Country/Territory	United States
City	Detroit
Period	9/10/22 → 13/10/22

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Induction machine
broken rotor bar
machine emulation
machine modeling
power hardware-in-the-loop

Access to Document

10.1109/ECCE50734.2022.9947658

Cite this

Liu, Y., Boniface, C., Barendse, P., & Pillay, P. (2022). Power-Hardware-in-the-Loop Based Induction Motor Emulator with Rotor Cage Fault. In 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022 (2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ECCE50734.2022.9947658

@inproceedings{8e4c9a7155d04327b4e46353326be583,

title = "Power-Hardware-in-the-Loop Based Induction Motor Emulator with Rotor Cage Fault",

abstract = "The induction machine (IM) is commonly adopted in industry, which plays an important role in energy conversion between mechanical and electrical power. Asymmetrical faults caused by internal failures commonly occur in IMs. Such faults not only reduce the working efficiency and cause excessive heating, but also cause potential hazards preventing continuous operation and safety problems. This paper proposes a power electronic converter-based IM power hardware-in-the-loop (PHIL) emulator, which is able to emulate an IM with internal faults. Firstly, the machine parameter measurement method for an induction motor with a rotor cage fault is introduced. Then the rotor cage fault machine is identified by using stator current spectral components. Based on that, the PHIL emulator is developed and tested for an IM with rotor cage fault. A comparison of the emulator results with simulation results and actual IM results demonstrates the validity of proposed solution.",

keywords = "Induction machine, broken rotor bar, machine emulation, machine modeling, power hardware-in-the-loop",

author = "Yupeng Liu and Chigozie Boniface and Paul Barendse and Pragasen Pillay",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022 ; Conference date: 09-10-2022 Through 13-10-2022",

year = "2022",

doi = "10.1109/ECCE50734.2022.9947658",

language = "英语",

series = "2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022",

address = "美国",

}

Liu, Y, Boniface, C, Barendse, P & Pillay, P 2022, Power-Hardware-in-the-Loop Based Induction Motor Emulator with Rotor Cage Fault. in 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022. 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022, Institute of Electrical and Electronics Engineers Inc., 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022, Detroit, United States, 9/10/22. https://doi.org/10.1109/ECCE50734.2022.9947658

Power-Hardware-in-the-Loop Based Induction Motor Emulator with Rotor Cage Fault. / Liu, Yupeng; Boniface, Chigozie; Barendse, Paul et al.
2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Power-Hardware-in-the-Loop Based Induction Motor Emulator with Rotor Cage Fault

AU - Liu, Yupeng

AU - Boniface, Chigozie

AU - Barendse, Paul

AU - Pillay, Pragasen

PY - 2022

Y1 - 2022

N2 - The induction machine (IM) is commonly adopted in industry, which plays an important role in energy conversion between mechanical and electrical power. Asymmetrical faults caused by internal failures commonly occur in IMs. Such faults not only reduce the working efficiency and cause excessive heating, but also cause potential hazards preventing continuous operation and safety problems. This paper proposes a power electronic converter-based IM power hardware-in-the-loop (PHIL) emulator, which is able to emulate an IM with internal faults. Firstly, the machine parameter measurement method for an induction motor with a rotor cage fault is introduced. Then the rotor cage fault machine is identified by using stator current spectral components. Based on that, the PHIL emulator is developed and tested for an IM with rotor cage fault. A comparison of the emulator results with simulation results and actual IM results demonstrates the validity of proposed solution.

AB - The induction machine (IM) is commonly adopted in industry, which plays an important role in energy conversion between mechanical and electrical power. Asymmetrical faults caused by internal failures commonly occur in IMs. Such faults not only reduce the working efficiency and cause excessive heating, but also cause potential hazards preventing continuous operation and safety problems. This paper proposes a power electronic converter-based IM power hardware-in-the-loop (PHIL) emulator, which is able to emulate an IM with internal faults. Firstly, the machine parameter measurement method for an induction motor with a rotor cage fault is introduced. Then the rotor cage fault machine is identified by using stator current spectral components. Based on that, the PHIL emulator is developed and tested for an IM with rotor cage fault. A comparison of the emulator results with simulation results and actual IM results demonstrates the validity of proposed solution.

KW - Induction machine

KW - broken rotor bar

KW - machine emulation

KW - machine modeling

KW - power hardware-in-the-loop

UR - https://www.scopus.com/pages/publications/85144058309

U2 - 10.1109/ECCE50734.2022.9947658

DO - 10.1109/ECCE50734.2022.9947658

M3 - 会议稿件

AN - SCOPUS:85144058309

T3 - 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022

BT - 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022

Y2 - 9 October 2022 through 13 October 2022

ER -

Power-Hardware-in-the-Loop Based Induction Motor Emulator with Rotor Cage Fault

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this