Numerical investigation on unsteady separation flow control in an axial compressor using detached-eddy simulation

  • Mingming Zhang
  • , Anping Hou*
  • *Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

Abstract

Unsteady excitation has proved its effectiveness in separation flow control and has been extensively studied. It is observed that disordered shedding vortices in compressors can be controlled by unsteady excitation, especially when the excitation frequency coincides with the frequency of the shedding vortex. Furthermore, former experimental results indicated that unsteady excitation at other frequencies also had an impact on the structure of shedding vortices. To investigate the impact of excitation frequency on vortex shedding structure, the Detached-Eddy Simulation (DES) method was applied in the simulation of shedding vortex structure under unsteady excitations at different frequencies in an axial compressor. Effectiveness of the DES method was proved by comparison with URANS results. The simulation results showed a good agreement with the former experiment. The numerical results indicated that the separation flow can be partly controlled when the excitation frequency coincided with the unsteady flow inherent frequency. It showed an increase in stage performance under the less-studied separation flow control by excitation at a certain frequency of pressure side shedding vortex. Compared with other frequencies of shedding vortices, the frequency of pressure side shedding vortex was less sensitive to mass-flow variation. Therefore, it has potential for easier application on flow control in industrial compressors.

Original languageEnglish
Article number3298
JournalApplied Sciences (Switzerland)
Volume9
Issue number16
DOIs
StatePublished - 1 Aug 2019

Keywords

  • Detached-Eddy Simulation
  • Separation flow
  • Unsteady flow control
  • Vortex dynamics

Fingerprint

Dive into the research topics of 'Numerical investigation on unsteady separation flow control in an axial compressor using detached-eddy simulation'. Together they form a unique fingerprint.

Cite this