NO conversion by positive streamer discharge - Effects of gas compositions and reaction conditions

Wei He; Tianle Zhu; Jing Li

doi:10.1007/s11783-007-0027-z

NO conversion by positive streamer discharge - Effects of gas compositions and reaction conditions

Wei He
, Tianle Zhu^*
, Jing Li

^*Corresponding author for this work

School of Materials Science and Engineering

Beihang University

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

The effects of gas compositions and reaction conditions on NO conversion by positive streamer discharge were experimentally investigated by using a link tooth wheel-cylinder reactor. The results showed that NO conversion increased with increasing O₂ concentration and NH₃ concentration, but decreased with increasing inlet NO concentration and gas flow rate. The addition of CO₂ or H₂O to the feed gas promoted NO conversion by increasing the maximum discharge voltage, and NH ₄NO₃ was formed in the presence of NH₃. There was a most suitable range interval between discharge tooth wheels if both NO conversion and energy consumption were considered. Increasing applied voltage resulted in the increase in the amount of O₃ generated by streamer discharge.

Original language	English
Pages (from-to)	153-158
Number of pages	6
Journal	Frontiers of Environmental Science and Engineering in China
Volume	1
Issue number	2
DOIs	https://doi.org/10.1007/s11783-007-0027-z
State	Published - May 2007

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

NO conversion
Process variables
Streamer discharge

Access to Document

10.1007/s11783-007-0027-z

Cite this

@article{22f8e587020046b09cea0a51b23bc070,

title = "NO conversion by positive streamer discharge - Effects of gas compositions and reaction conditions",

abstract = "The effects of gas compositions and reaction conditions on NO conversion by positive streamer discharge were experimentally investigated by using a link tooth wheel-cylinder reactor. The results showed that NO conversion increased with increasing O2 concentration and NH3 concentration, but decreased with increasing inlet NO concentration and gas flow rate. The addition of CO2 or H2O to the feed gas promoted NO conversion by increasing the maximum discharge voltage, and NH 4NO3 was formed in the presence of NH3. There was a most suitable range interval between discharge tooth wheels if both NO conversion and energy consumption were considered. Increasing applied voltage resulted in the increase in the amount of O3 generated by streamer discharge.",

keywords = "NO conversion, Process variables, Streamer discharge",

author = "Wei He and Tianle Zhu and Jing Li",

year = "2007",

month = may,

doi = "10.1007/s11783-007-0027-z",

language = "英语",

volume = "1",

pages = "153--158",

journal = "Frontiers of Environmental Science and Engineering in China",

issn = "1673-7415",

publisher = "Higher Education Press Limited Company",

number = "2",

}

TY - JOUR

T1 - NO conversion by positive streamer discharge - Effects of gas compositions and reaction conditions

AU - He, Wei

AU - Zhu, Tianle

AU - Li, Jing

PY - 2007/5

Y1 - 2007/5

N2 - The effects of gas compositions and reaction conditions on NO conversion by positive streamer discharge were experimentally investigated by using a link tooth wheel-cylinder reactor. The results showed that NO conversion increased with increasing O2 concentration and NH3 concentration, but decreased with increasing inlet NO concentration and gas flow rate. The addition of CO2 or H2O to the feed gas promoted NO conversion by increasing the maximum discharge voltage, and NH 4NO3 was formed in the presence of NH3. There was a most suitable range interval between discharge tooth wheels if both NO conversion and energy consumption were considered. Increasing applied voltage resulted in the increase in the amount of O3 generated by streamer discharge.

AB - The effects of gas compositions and reaction conditions on NO conversion by positive streamer discharge were experimentally investigated by using a link tooth wheel-cylinder reactor. The results showed that NO conversion increased with increasing O2 concentration and NH3 concentration, but decreased with increasing inlet NO concentration and gas flow rate. The addition of CO2 or H2O to the feed gas promoted NO conversion by increasing the maximum discharge voltage, and NH 4NO3 was formed in the presence of NH3. There was a most suitable range interval between discharge tooth wheels if both NO conversion and energy consumption were considered. Increasing applied voltage resulted in the increase in the amount of O3 generated by streamer discharge.

KW - NO conversion

KW - Process variables

KW - Streamer discharge

UR - https://www.scopus.com/pages/publications/34249888459

U2 - 10.1007/s11783-007-0027-z

DO - 10.1007/s11783-007-0027-z

M3 - 文章

AN - SCOPUS:34249888459

SN - 1673-7415

VL - 1

SP - 153

EP - 158

JO - Frontiers of Environmental Science and Engineering in China

JF - Frontiers of Environmental Science and Engineering in China

IS - 2

ER -

NO conversion by positive streamer discharge - Effects of gas compositions and reaction conditions

Abstract

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this