Microstructure of a laser surface melted SiC particle reinforced aluminum metal matrix composite

A. Shaban; W. Q. Hong; L. G. Yu; H. M. Wang

doi:10.1117/12.361123

Microstructure of a laser surface melted SiC particle reinforced aluminum metal matrix composite

A. Shaban^*
, W. Q. Hong
, L. G. Yu
, H. M. Wang

^*Corresponding author for this work

School of Materials Science and Engineering

Beihang University

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

Abstract

A SiC particle reinforced aluminum matrix composite (SiCp/Al composite) is melted by a high power continuous wave CO₂ laser. Microstructure of the laser melted SiCp/Al MMC is studied as functions of laser processing parameters. The silicon carbide particles are completely dissolved during laser surface melting and aluminum silicon carbide Al₄SiC₄, aluminum carbide Al₄C₃, and primary silicon particles are produced in the laser melted surface. The size and volume fraction of the newly formed phases depend on the processing conditions. The relative volume fraction of Al₄SiC₄ to Al₄C₃ is strongly dependent on the laser linear energy density, a higher linear energy density leading to more Al₄SiC₄ formation. Result of anodic polarization corrosion test indicates that the corrosion resistance of the SiCp/Al MMC is not improved after laser surface melting.

Original language	English
Pages (from-to)	453-457
Number of pages	5
Journal	Proceedings of SPIE - The International Society for Optical Engineering
Volume	3862
DOIs	https://doi.org/10.1117/12.361123
State	Published - 1999
Event	Proceedings of the 1999 International Conference on Industrial Lasers (IL '99) - Wuhan, China Duration: 22 Oct 1999 → 27 Oct 1999

Access to Document

10.1117/12.361123

Cite this

@article{935e54f57c674f15acbcaf755f7d4ec5,

title = "Microstructure of a laser surface melted SiC particle reinforced aluminum metal matrix composite",

abstract = "A SiC particle reinforced aluminum matrix composite (SiCp/Al composite) is melted by a high power continuous wave CO2 laser. Microstructure of the laser melted SiCp/Al MMC is studied as functions of laser processing parameters. The silicon carbide particles are completely dissolved during laser surface melting and aluminum silicon carbide Al4SiC4, aluminum carbide Al4C3, and primary silicon particles are produced in the laser melted surface. The size and volume fraction of the newly formed phases depend on the processing conditions. The relative volume fraction of Al4SiC4 to Al4C3 is strongly dependent on the laser linear energy density, a higher linear energy density leading to more Al4SiC4 formation. Result of anodic polarization corrosion test indicates that the corrosion resistance of the SiCp/Al MMC is not improved after laser surface melting.",

author = "A. Shaban and Hong, \{W. Q.\} and Yu, \{L. G.\} and Wang, \{H. M.\}",

year = "1999",

doi = "10.1117/12.361123",

language = "英语",

volume = "3862",

pages = "453--457",

journal = "Proceedings of SPIE - The International Society for Optical Engineering",

issn = "0277-786X",

publisher = "SPIE",

note = "Proceedings of the 1999 International Conference on Industrial Lasers (IL '99) ; Conference date: 22-10-1999 Through 27-10-1999",

}

TY - JOUR

T1 - Microstructure of a laser surface melted SiC particle reinforced aluminum metal matrix composite

AU - Shaban, A.

AU - Hong, W. Q.

AU - Yu, L. G.

AU - Wang, H. M.

PY - 1999

Y1 - 1999

N2 - A SiC particle reinforced aluminum matrix composite (SiCp/Al composite) is melted by a high power continuous wave CO2 laser. Microstructure of the laser melted SiCp/Al MMC is studied as functions of laser processing parameters. The silicon carbide particles are completely dissolved during laser surface melting and aluminum silicon carbide Al4SiC4, aluminum carbide Al4C3, and primary silicon particles are produced in the laser melted surface. The size and volume fraction of the newly formed phases depend on the processing conditions. The relative volume fraction of Al4SiC4 to Al4C3 is strongly dependent on the laser linear energy density, a higher linear energy density leading to more Al4SiC4 formation. Result of anodic polarization corrosion test indicates that the corrosion resistance of the SiCp/Al MMC is not improved after laser surface melting.

AB - A SiC particle reinforced aluminum matrix composite (SiCp/Al composite) is melted by a high power continuous wave CO2 laser. Microstructure of the laser melted SiCp/Al MMC is studied as functions of laser processing parameters. The silicon carbide particles are completely dissolved during laser surface melting and aluminum silicon carbide Al4SiC4, aluminum carbide Al4C3, and primary silicon particles are produced in the laser melted surface. The size and volume fraction of the newly formed phases depend on the processing conditions. The relative volume fraction of Al4SiC4 to Al4C3 is strongly dependent on the laser linear energy density, a higher linear energy density leading to more Al4SiC4 formation. Result of anodic polarization corrosion test indicates that the corrosion resistance of the SiCp/Al MMC is not improved after laser surface melting.

UR - https://www.scopus.com/pages/publications/0033356723

U2 - 10.1117/12.361123

DO - 10.1117/12.361123

M3 - 会议文章

AN - SCOPUS:0033356723

SN - 0277-786X

VL - 3862

SP - 453

EP - 457

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

T2 - Proceedings of the 1999 International Conference on Industrial Lasers (IL '99)

Y2 - 22 October 1999 through 27 October 1999

ER -

Microstructure of a laser surface melted SiC particle reinforced aluminum metal matrix composite

Abstract

Access to Document

Other files and links

Fingerprint

Cite this