Microstructure and sliding-wear behavior of tungsten-reinforced W-Ni-Si metal-silicide in-situ composites

W-Ni-Si metal-silicide-matrix in-situ composites reinforced by tungsten primary grains were fabricated using a water-cooled copper-mold laser-melting furnace by the LASMELT process. Main constitutional phases of the W/W-Ni-Si in-situ composites are the tungsten primary phase, peritectic W₂Ni₃Si, and the remaining W₂Ni₃Si/Ni₃₁Si₁₂ eutectics, depending on the alloy compositions. The sliding-wear resistance of the W/W-Ni-Si intermetallic composites was evaluated at room temperature and 600 °C. Wear mechanisms of the W/W₂Ni₃Si in-situ composites were discussed based on morphology observations of the worn surface and wear debris. Results show that the W/W-Ni-Si composites have excellent wear resistance under both room- and high-temperature sliding-wear-test conditions, because of the high yield strength and toughness of the tungsten-reinforcing phase and the high hardness and the covalent-dominated intermetallic atomic bonds of the W₂Ni₃Si and Ni₃₁Si₁₂ metal silicides. Tungsten-reinforcing grains played the dominant role in resisting abrasive-wear attacks of microcutting, plowing, and brittle spalling during the sliding-wear process, while the W₂Ni₃Si and Ni₃₁Si₁₂ metal silicides are responsible for the excellent adhesive wear resistance.