Skip to main navigation Skip to search Skip to main content

High ZT >1.4 Realized in Bi2Se2S via Amorphous–Crystalline Coexistence Structure of Secondary Phase and Bilayer Rotation

  • Kun Huang
  • , Chong Yu Wang
  • , Yi Xuan Hu
  • , Ye Hua Jiang
  • , Yi Xin Zhang
  • , Li Dong Zhao
  • , Zhen Hua Ge*
  • , Jing Feng*
  • *Corresponding author for this work
  • Kunming University of Science and Technology
  • Beihang University

Research output: Contribution to journalArticlepeer-review

Abstract

TeCl4 doping induces an amorphous–crystalline coexistence and bilayer rotation in layered Bi2Se2S, synergistically optimizing electrical and thermal transport. The unique structure shifts the CBM/VBM, converting Bi2Se2S from a direct to an indirect semiconductor and narrowing the bandgap from 1.07 to 0.88 eV. Band-edge flattening increases carrier effective mass, while Te-5p states enhance conduction-band contribution, raise the Seebeck coefficient, and tune the Fermi level to strengthen n type behavior. A power factor of 800 µW·m−1·K−2 is achieved at 773 K. Periodic moiré fringes and lattice distortion intensify mid to high frequency phonon scattering, lowering lattice thermal conductivity to 0.27 W·m−1·K−1. Consequently, ZT reaches 1.44 at 773 K with an average ZT of 0.78 over 423–773 K. We also demonstrate, for the first time, a single leg n type thermoelectric module based on this material, delivering 2.3% efficiency under a 300 K temperature difference. This work establishes an effective route to simultaneously achieve low κ and high electrical performance via amorphous–crystalline coexistence and bilayer rotation, advancing Bi2Se2S toward mid temperature thermoelectric applications.

Original languageFrench
Article numbere18982
JournalAdvanced Functional Materials
Volume36
Issue number13
DOIs
StatePublished - 12 Feb 2026

Cite this