Skip to main navigation Skip to search Skip to main content

Galvanic corrosion behavior of aluminum alloy (2219 and ZL205A) coupled to carbon fiber-reinforced epoxy composites

  • Shiwen Zou*
  • , Yanxian Zhang
  • , Wen Xu
  • , Yingqi Wan
  • , Chang He
  • , Chaofang Dong
  • , Xiaogang Li
  • *Corresponding author for this work
  • China Aerospace Science and Technology Corporation
  • University of Science and Technology Beijing

Research output: Contribution to journalArticlepeer-review

Abstract

The galvanic corrosion behaviors between carbon fiber-reinforced epoxy composites (CFREC) and aluminum alloy (2219 and ZL205A) in 3.5 wt.% sodium chloride solutions were evaluated by laboratory electrochemical measurement. The corrosion morphology, products and galvanic currents of galvanic couples were measured. The results indicate that there were serious galvanic corrosion when these two kinds of materials were coupled for 10 hours in 3.5wt.% NaCl solution, corrosion pits and grooves can be clearly observed on both aluminum alloys; the galvanic current of 2219 is slightly higher than that of ZL205A which both decrease with time; the average galvanic current density of 2219 and ZL205A is 20.19μA·cm-2 and 16.08 μA·cm-2 respectively; as a result, two types of aluminum alloys are not allowed to contact with CFREC directly in hygrothermal salt spray environment.

Original languageEnglish
Pages (from-to)9625-9633
Number of pages9
JournalInternational Journal of Electrochemical Science
Volume11
Issue number11
DOIs
StatePublished - 2016
Externally publishedYes

Keywords

  • Aluminum alloy
  • Carbon fiber-reinforced epoxy composites
  • Galvanic corrosion

Fingerprint

Dive into the research topics of 'Galvanic corrosion behavior of aluminum alloy (2219 and ZL205A) coupled to carbon fiber-reinforced epoxy composites'. Together they form a unique fingerprint.

Cite this