Skip to main navigation Skip to search Skip to main content

Experimental study of thermal contact conductance across solid/solid interface

  • Beihang University

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

This article describes an experimental setup to measure the TCC between interfaces of two contact solid materials. This apparatus consists of loading and load bearing subsystem, water-cooling subsystem, heating subsystem, temperature measurement and control subsystem and thermal insulation subsystem. A cooling water tank is used to increase the heat flux in axial direction. An experimental investigation of TCC is conducted with pressed pairs of TC4/30CrMnSi contacts in the range 40∼140MPa. The results show that TCC over this condition increases with load, and is greater in the process of unloading than that of loading under the same condition.

Original languageEnglish
Title of host publicationFrontiers of Manufacturing Science and Measuring Technology II
Pages1082-1085
Number of pages4
DOIs
StatePublished - 2012
Event2012 2nd International Conference on Frontiers of Manufacturing Science and Measuring Technology, ICFMM 2012 - Xi'an, China
Duration: 12 Jun 201213 Jun 2012

Publication series

NameAdvanced Materials Research
Volume503-504
ISSN (Print)1022-6680

Conference

Conference2012 2nd International Conference on Frontiers of Manufacturing Science and Measuring Technology, ICFMM 2012
Country/TerritoryChina
CityXi'an
Period12/06/1213/06/12

Keywords

  • Aeroengine
  • Experiment
  • Thermal contact conductance
  • Thermal contact resistance

Fingerprint

Dive into the research topics of 'Experimental study of thermal contact conductance across solid/solid interface'. Together they form a unique fingerprint.

Cite this