Embedded CDC system with the μc/os-II OS

Tianmiao Wang; Youdong Chen; Kai Sun; Hongxing Wei

Embedded CDC system with the μc/os-II OS

Tianmiao Wang^*
, Youdong Chen
, Kai Sun
, Hongxing Wei

^*Corresponding author for this work

School of Mechanical Engineering and Automation

Beihang University

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

An embedded CNC (computer numerical control) system and its hardware and software platform are presented. The system hardware consists of microcontroller ARM (advanced RISC machines) and FPGA (field programmable gate arrays). The CNC system application runs on the ARM, while FPGA is used to connect 10 and generate pulses. The software platform utilizes the μc/os-H OS to provide hard real time capabilities. The CNC controller software architecture which applies a generic open architecture model with a software bus is presented. Some important methods for carrying out the implementing of the CNC controller are researched and demonstrated, including thread cutting. Finally, a real machining experiment on the system mentioned above is introduced. The result shows that it can be successfully used in real manufacturing environment.

Original language	English
Pages (from-to)	471-474+480
Journal	Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics
Volume	32
Issue number	4
State	Published - Apr 2006

Keywords

Advanced RISC machines
Computer numerical control
Field programmable gate arrays
Real time system

Cite this

@article{ee80604fdc604039bfa9a85532de4701,

title = "Embedded CDC system with the μc/os-II OS",

abstract = "An embedded CNC (computer numerical control) system and its hardware and software platform are presented. The system hardware consists of microcontroller ARM (advanced RISC machines) and FPGA (field programmable gate arrays). The CNC system application runs on the ARM, while FPGA is used to connect 10 and generate pulses. The software platform utilizes the μc/os-H OS to provide hard real time capabilities. The CNC controller software architecture which applies a generic open architecture model with a software bus is presented. Some important methods for carrying out the implementing of the CNC controller are researched and demonstrated, including thread cutting. Finally, a real machining experiment on the system mentioned above is introduced. The result shows that it can be successfully used in real manufacturing environment.",

keywords = "Advanced RISC machines, Computer numerical control, Field programmable gate arrays, Real time system",

author = "Tianmiao Wang and Youdong Chen and Kai Sun and Hongxing Wei",

year = "2006",

month = apr,

language = "英语",

volume = "32",

pages = "471--474+480",

journal = "Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics",

issn = "1001-5965",

publisher = "Beijing University of Aeronautics and Astronautics (BUAA)",

number = "4",

}

TY - JOUR

T1 - Embedded CDC system with the μc/os-II OS

AU - Wang, Tianmiao

AU - Chen, Youdong

AU - Sun, Kai

AU - Wei, Hongxing

PY - 2006/4

Y1 - 2006/4

N2 - An embedded CNC (computer numerical control) system and its hardware and software platform are presented. The system hardware consists of microcontroller ARM (advanced RISC machines) and FPGA (field programmable gate arrays). The CNC system application runs on the ARM, while FPGA is used to connect 10 and generate pulses. The software platform utilizes the μc/os-H OS to provide hard real time capabilities. The CNC controller software architecture which applies a generic open architecture model with a software bus is presented. Some important methods for carrying out the implementing of the CNC controller are researched and demonstrated, including thread cutting. Finally, a real machining experiment on the system mentioned above is introduced. The result shows that it can be successfully used in real manufacturing environment.

AB - An embedded CNC (computer numerical control) system and its hardware and software platform are presented. The system hardware consists of microcontroller ARM (advanced RISC machines) and FPGA (field programmable gate arrays). The CNC system application runs on the ARM, while FPGA is used to connect 10 and generate pulses. The software platform utilizes the μc/os-H OS to provide hard real time capabilities. The CNC controller software architecture which applies a generic open architecture model with a software bus is presented. Some important methods for carrying out the implementing of the CNC controller are researched and demonstrated, including thread cutting. Finally, a real machining experiment on the system mentioned above is introduced. The result shows that it can be successfully used in real manufacturing environment.

KW - Advanced RISC machines

KW - Computer numerical control

KW - Field programmable gate arrays

KW - Real time system

UR - https://www.scopus.com/pages/publications/33745802836

M3 - 文章

AN - SCOPUS:33745802836

SN - 1001-5965

VL - 32

SP - 471-474+480

JO - Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics

JF - Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics

IS - 4

ER -

Embedded CDC system with the μc/os-II OS

Abstract

Keywords

Other files and links

Fingerprint

Cite this