Effect of shot-peening on surface roughness of NiCoCrAlY coating on Ni3Al base alloy IC6

Jin Xia Song; Ya Fang Han; Qing Quan Liu; Sheng Kai Gong; Shu Suo Li; Song Zhao

Effect of shot-peening on surface roughness of NiCoCrAlY coating on Ni₃Al base alloy IC6

Jin Xia Song^*
, Ya Fang Han
, Qing Quan Liu
, Sheng Kai Gong
, Shu Suo Li
, Song Zhao

^*Corresponding author for this work

Beijing Institute of Aeronautical Materials
Xinyi Machinery Factory

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

The effect of shot-peening on the surface roughness of NiCoCrAlY coating on Ni₃Al base alloy IC6 was investigated. The results indicated that shot-peening could obviously decrease the roughness of NiCoCrAlY coating to smaller than 1.6 μm, and also increased the density of the coating, as shot-peening was carried out after the vacuum diffusion heat-treatment of the coating, the pressure was 0.4 MPa and lasting time was 4 min. Moreover, the residual compressive stress did not result in the recrystallization of IC6 alloy. Therefore, it was feasible to decreasing the surface roughness of NiCoCrAlY coating by shot-peening.

Original language	English
Pages (from-to)	289-290
Number of pages	2
Journal	Journal of Aeronautical Materials
Volume	26
Issue number	3
State	Published - Jun 2006

Keywords

IC6 alloy
NiCoCrAlY coating
Shot-peening
Surface roughness

Cite this

@article{afac33fcf83243cbbc853b9207a73a05,

title = "Effect of shot-peening on surface roughness of NiCoCrAlY coating on Ni3Al base alloy IC6",

abstract = "The effect of shot-peening on the surface roughness of NiCoCrAlY coating on Ni3Al base alloy IC6 was investigated. The results indicated that shot-peening could obviously decrease the roughness of NiCoCrAlY coating to smaller than 1.6 μm, and also increased the density of the coating, as shot-peening was carried out after the vacuum diffusion heat-treatment of the coating, the pressure was 0.4 MPa and lasting time was 4 min. Moreover, the residual compressive stress did not result in the recrystallization of IC6 alloy. Therefore, it was feasible to decreasing the surface roughness of NiCoCrAlY coating by shot-peening.",

keywords = "IC6 alloy, NiCoCrAlY coating, Shot-peening, Surface roughness",

author = "Song, \{Jin Xia\} and Han, \{Ya Fang\} and Liu, \{Qing Quan\} and Gong, \{Sheng Kai\} and Li, \{Shu Suo\} and Song Zhao",

year = "2006",

month = jun,

language = "英语",

volume = "26",

pages = "289--290",

journal = "Journal of Aeronautical Materials",

issn = "1005-5053",

publisher = "Science Press ",

number = "3",

}

TY - JOUR

T1 - Effect of shot-peening on surface roughness of NiCoCrAlY coating on Ni3Al base alloy IC6

AU - Song, Jin Xia

AU - Han, Ya Fang

AU - Liu, Qing Quan

AU - Gong, Sheng Kai

AU - Li, Shu Suo

AU - Zhao, Song

PY - 2006/6

Y1 - 2006/6

N2 - The effect of shot-peening on the surface roughness of NiCoCrAlY coating on Ni3Al base alloy IC6 was investigated. The results indicated that shot-peening could obviously decrease the roughness of NiCoCrAlY coating to smaller than 1.6 μm, and also increased the density of the coating, as shot-peening was carried out after the vacuum diffusion heat-treatment of the coating, the pressure was 0.4 MPa and lasting time was 4 min. Moreover, the residual compressive stress did not result in the recrystallization of IC6 alloy. Therefore, it was feasible to decreasing the surface roughness of NiCoCrAlY coating by shot-peening.

AB - The effect of shot-peening on the surface roughness of NiCoCrAlY coating on Ni3Al base alloy IC6 was investigated. The results indicated that shot-peening could obviously decrease the roughness of NiCoCrAlY coating to smaller than 1.6 μm, and also increased the density of the coating, as shot-peening was carried out after the vacuum diffusion heat-treatment of the coating, the pressure was 0.4 MPa and lasting time was 4 min. Moreover, the residual compressive stress did not result in the recrystallization of IC6 alloy. Therefore, it was feasible to decreasing the surface roughness of NiCoCrAlY coating by shot-peening.

KW - IC6 alloy

KW - NiCoCrAlY coating

KW - Shot-peening

KW - Surface roughness

UR - https://www.scopus.com/pages/publications/33746224055

M3 - 文章

AN - SCOPUS:33746224055

SN - 1005-5053

VL - 26

SP - 289

EP - 290

JO - Journal of Aeronautical Materials

JF - Journal of Aeronautical Materials

IS - 3

ER -

Effect of shot-peening on surface roughness of NiCoCrAlY coating on Ni₃Al base alloy IC6

Abstract

Keywords

Other files and links

Fingerprint

Cite this