Effect of La addition on microstructure and mechanical properties of hypoeutectic Al-7Si aluminum alloy

The effect of La addition (0, 0.1, 0.2, 0.4, wt.%) on the microstructure, tensile properties and fracture behavior of Al-7Si alloy was investigated systematically. It is found that the La appears in the Al-7Si alloy in the form of Al₄La and Al₂Si₂La phases. La addition can refine the secondary dendrite arm spacing (SDAS) and eutectic Si particles, which are decreased by 7.9% and 7%, respectively, with the optimal La content of 0.1wt.%. Because when 0.1wt.% La is added, a relatively higher nucleation undercooling of 37.47 °C is observed. Higher undercooling degree suggests that nucleation is accelerated and subsequent growth is restrained. After T6 heat treatment, compared with the without La, the ultimate tensile strength of the alloy with 0.1wt.% La is enhanced by 5.2% from 333 MPa to 350.2 MPa and the elongation increases by 73% from 7.37% to 12.75%, correspondingly. The fracture mode evolves from the ductile-brittle mixed fracture to ductile fracture mode. However, when La element content reaches a certain value of 0.4wt.%, serious segregation takes place during the solidification process. The formed brittle phases deteriorate the tensile properties of the alloy and the fracture mode of Al- 7Si-0.2/0.4 La changes to mixed ductile-brittle fracture mode.