Development of brake-by-wire hardware-in-loop simulation bench

Jun Liu; Yongling Fu; Zhanlin Wang; Juan Chen

doi:10.1109/CDCIEM.2012.62

Development of brake-by-wire hardware-in-loop simulation bench

Jun Liu^*
, Yongling Fu
, Zhanlin Wang
, Juan Chen

^*Corresponding author for this work

School of Mechanical Engineering and Automation

Beihang University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

This paper mainly describes a PC-based Brake-By-Wire Hardware-In-Loop- simulation Bench which has high efficiency and applicability. System architecture, hardware configuration, and software model of this bench are presented in details. The electric braking controllers collect , process and transfer all kinds of information, and generate simultaneous control codes according to the control algorithm, then drive electromechanical actuator and braking parts. For improving the safety and reliability, redundancy is adopted to realize reconstruction when the simulation system occurs faults. Experiments show this simulation bench is a practical tool for the design, test and parameter optimization for electric braking system.

Original language	English
Title of host publication	Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012
Pages	236-240
Number of pages	5
DOIs	https://doi.org/10.1109/CDCIEM.2012.62
State	Published - 2012
Event	2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012 - Zhangjiajie, Hunan, China Duration: 5 Mar 2012 → 6 Mar 2012

Publication series

Name	Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012

Conference

Conference	2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012
Country/Territory	China
City	Zhangjiajie, Hunan
Period	5/03/12 → 6/03/12

Keywords

Brake-by-wire (BBW)
Electro-mechanical actuator (EMA)
Hardware-in-the-loop simulation (HILS)
Redundancy

Access to Document

10.1109/CDCIEM.2012.62

Cite this

Liu, J., Fu, Y., Wang, Z., & Chen, J. (2012). Development of brake-by-wire hardware-in-loop simulation bench. In Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012 (pp. 236-240). Article 6178558 (Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012). https://doi.org/10.1109/CDCIEM.2012.62

Liu, Jun ; Fu, Yongling ; Wang, Zhanlin et al. / Development of brake-by-wire hardware-in-loop simulation bench. Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012. 2012. pp. 236-240 (Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012).

@inproceedings{73d04ab0e1154cf8b4b99e519f63cffb,

title = "Development of brake-by-wire hardware-in-loop simulation bench",

abstract = "This paper mainly describes a PC-based Brake-By-Wire Hardware-In-Loop- simulation Bench which has high efficiency and applicability. System architecture, hardware configuration, and software model of this bench are presented in details. The electric braking controllers collect , process and transfer all kinds of information, and generate simultaneous control codes according to the control algorithm, then drive electromechanical actuator and braking parts. For improving the safety and reliability, redundancy is adopted to realize reconstruction when the simulation system occurs faults. Experiments show this simulation bench is a practical tool for the design, test and parameter optimization for electric braking system.",

keywords = "Brake-by-wire (BBW), Electro-mechanical actuator (EMA), Hardware-in-the-loop simulation (HILS), Redundancy",

author = "Jun Liu and Yongling Fu and Zhanlin Wang and Juan Chen",

year = "2012",

doi = "10.1109/CDCIEM.2012.62",

language = "英语",

isbn = "9780769546391",

series = "Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012",

pages = "236--240",

booktitle = "Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012",

note = "2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012 ; Conference date: 05-03-2012 Through 06-03-2012",

}

Liu, J, Fu, Y, Wang, Z & Chen, J 2012, Development of brake-by-wire hardware-in-loop simulation bench. in Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012., 6178558, Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012, pp. 236-240, 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012, Zhangjiajie, Hunan, China, 5/03/12. https://doi.org/10.1109/CDCIEM.2012.62

Development of brake-by-wire hardware-in-loop simulation bench. / Liu, Jun; Fu, Yongling; Wang, Zhanlin et al.
Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012. 2012. p. 236-240 6178558 (Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Development of brake-by-wire hardware-in-loop simulation bench

AU - Liu, Jun

AU - Fu, Yongling

AU - Wang, Zhanlin

AU - Chen, Juan

PY - 2012

Y1 - 2012

N2 - This paper mainly describes a PC-based Brake-By-Wire Hardware-In-Loop- simulation Bench which has high efficiency and applicability. System architecture, hardware configuration, and software model of this bench are presented in details. The electric braking controllers collect , process and transfer all kinds of information, and generate simultaneous control codes according to the control algorithm, then drive electromechanical actuator and braking parts. For improving the safety and reliability, redundancy is adopted to realize reconstruction when the simulation system occurs faults. Experiments show this simulation bench is a practical tool for the design, test and parameter optimization for electric braking system.

AB - This paper mainly describes a PC-based Brake-By-Wire Hardware-In-Loop- simulation Bench which has high efficiency and applicability. System architecture, hardware configuration, and software model of this bench are presented in details. The electric braking controllers collect , process and transfer all kinds of information, and generate simultaneous control codes according to the control algorithm, then drive electromechanical actuator and braking parts. For improving the safety and reliability, redundancy is adopted to realize reconstruction when the simulation system occurs faults. Experiments show this simulation bench is a practical tool for the design, test and parameter optimization for electric braking system.

KW - Brake-by-wire (BBW)

KW - Electro-mechanical actuator (EMA)

KW - Hardware-in-the-loop simulation (HILS)

KW - Redundancy

UR - https://www.scopus.com/pages/publications/84860526966

U2 - 10.1109/CDCIEM.2012.62

DO - 10.1109/CDCIEM.2012.62

M3 - 会议稿件

AN - SCOPUS:84860526966

SN - 9780769546391

T3 - Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012

SP - 236

EP - 240

BT - Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012

T2 - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012

Y2 - 5 March 2012 through 6 March 2012

ER -

Liu J, Fu Y, Wang Z, Chen J. Development of brake-by-wire hardware-in-loop simulation bench. In Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012. 2012. p. 236-240. 6178558. (Proceedings - 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2012). doi: 10.1109/CDCIEM.2012.62

Development of brake-by-wire hardware-in-loop simulation bench

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this