Development of a Novel Radial-Flux Machine With Enhanced Torque Profile Employing Quasi-Cylindrical PM Pattern

This article presents a novel radial-flux surface-mounted PM (SPM) machine with quasi-cylindrical pole pattern (QCPP). With the proposed configuration, the cogging torque and torque ripple of surface-mounted machines could be greatly decreased due to the adoption of large eccentric distance and the reduction of high-order airgap flux density harmonics. Moreover, the increase of fundamental flux component helps to improve torque generation well. Additionally, the magnet poles are semi-embedded into the rotor, and thus the sleeve in conventional SPM machines is no longer necessary, which helps to reduce the airgap size and improve the torque output further. Besides, the quasi-cylindrical magnet could offer lower rotor eddy loss and higher anti-demagnetization capability than conventional radial and eccentric pole patterns. Studies have been conducted on the novel structure to validate its advantages. Firstly, the topological structure and working principle of the QCPP machine are presented. Then, the influence of the QCPP structural parameters on the torque performance is investigated. Next, an electrical machine with quasi-cylindrical pole pattern is designed. Subsequently, the electromagnetic characteristics, such as flux density distribution, back EMF, average torque, cogging torque, torque ripple, eddy loss in sleeve, rotor stress and anti-demagnetization capability, of the proposed machine are analyzed and compared with those of conventional SPM machine with eccentric magnetic poles and skewing slots. Finally, one research prototype is developed, and experiments are carried out to evaluate the design concept and performance of the proposed QCPP machine.