Design of visible light communication node for underwater

Tao Shang; Gang Du; Xiaoyu Zhang; Hongkun Zhang

doi:10.13245/j.hust.15S1051

Design of visible light communication node for underwater

Tao Shang
, Gang Du
, Xiaoyu Zhang
, Hongkun Zhang

School of Cyber Science and Technology

Beihang University

Research output: Contribution to journal › Article › peer-review

Abstract

To adapt to the need of practical underwater communication application, the scheme of visible light communication node was designed for underwater, including hardware platform and software system. The hardware platform used STM32F405RGT6 as a master controller and contained visible light transmission module, visible light receiving module, power module and other peripheral circuits. Software system was mainly made up of operating system and protocol stack. In order to facilitate memory management and task scheduling, embedded operating system μC/OS II was transplanted on the hardware platform of communication node, and physical layer protocol and data link layer protocol were implemented based on the standard of IEEE 802.15.7. Through testing, it shows that the underwater visible light communication nodes can communicate within the scope of one meter for reliable transmission.

Original language	English
Pages (from-to)	211-215
Number of pages	5
Journal	Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)
Volume	43
DOIs	https://doi.org/10.13245/j.hust.15S1051
State	Published - 1 Oct 2015

Keywords

Hardware design
Protocol stack
Underwater communication
Visible light communication
μ C/OS II

Access to Document

10.13245/j.hust.15S1051

Cite this

@article{90b2763553484e798f9540388f7695de,

title = "Design of visible light communication node for underwater",

abstract = "To adapt to the need of practical underwater communication application, the scheme of visible light communication node was designed for underwater, including hardware platform and software system. The hardware platform used STM32F405RGT6 as a master controller and contained visible light transmission module, visible light receiving module, power module and other peripheral circuits. Software system was mainly made up of operating system and protocol stack. In order to facilitate memory management and task scheduling, embedded operating system μC/OS II was transplanted on the hardware platform of communication node, and physical layer protocol and data link layer protocol were implemented based on the standard of IEEE 802.15.7. Through testing, it shows that the underwater visible light communication nodes can communicate within the scope of one meter for reliable transmission.",

keywords = "Hardware design, Protocol stack, Underwater communication, Visible light communication, μ C/OS II",

author = "Tao Shang and Gang Du and Xiaoyu Zhang and Hongkun Zhang",

year = "2015",

month = oct,

day = "1",

doi = "10.13245/j.hust.15S1051",

language = "英语",

volume = "43",

pages = "211--215",

journal = "Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)",

issn = "1671-4512",

publisher = "Huazhong University of Science and Technology",

}

TY - JOUR

T1 - Design of visible light communication node for underwater

AU - Shang, Tao

AU - Du, Gang

AU - Zhang, Xiaoyu

AU - Zhang, Hongkun

PY - 2015/10/1

Y1 - 2015/10/1

N2 - To adapt to the need of practical underwater communication application, the scheme of visible light communication node was designed for underwater, including hardware platform and software system. The hardware platform used STM32F405RGT6 as a master controller and contained visible light transmission module, visible light receiving module, power module and other peripheral circuits. Software system was mainly made up of operating system and protocol stack. In order to facilitate memory management and task scheduling, embedded operating system μC/OS II was transplanted on the hardware platform of communication node, and physical layer protocol and data link layer protocol were implemented based on the standard of IEEE 802.15.7. Through testing, it shows that the underwater visible light communication nodes can communicate within the scope of one meter for reliable transmission.

AB - To adapt to the need of practical underwater communication application, the scheme of visible light communication node was designed for underwater, including hardware platform and software system. The hardware platform used STM32F405RGT6 as a master controller and contained visible light transmission module, visible light receiving module, power module and other peripheral circuits. Software system was mainly made up of operating system and protocol stack. In order to facilitate memory management and task scheduling, embedded operating system μC/OS II was transplanted on the hardware platform of communication node, and physical layer protocol and data link layer protocol were implemented based on the standard of IEEE 802.15.7. Through testing, it shows that the underwater visible light communication nodes can communicate within the scope of one meter for reliable transmission.

KW - Hardware design

KW - Protocol stack

KW - Underwater communication

KW - Visible light communication

KW - μ C/OS II

UR - https://www.scopus.com/pages/publications/84945276004

U2 - 10.13245/j.hust.15S1051

DO - 10.13245/j.hust.15S1051

M3 - 文章

AN - SCOPUS:84945276004

SN - 1671-4512

VL - 43

SP - 211

EP - 215

JO - Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)

JF - Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)

ER -

Design of visible light communication node for underwater

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this