Design of antireflective coatings for AZO low infrared emissivity layer

Tingting Guo; Liqing Zheng; Jean Pierre Nshimiyimana; Xungang Diao; Qiang Chen

doi:10.3788/COL201311.S10103

Design of antireflective coatings for AZO low infrared emissivity layer

Tingting Guo
, Liqing Zheng
, Jean Pierre Nshimiyimana
, Xungang Diao^*
, Qiang Chen

^*Corresponding author for this work

School of Energy and Power Engineering

Beihang University
CAMDA New Energy Equipment Co., Ltd

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

Abstract

In this letter, we investigate the structural, optical, and electrical properties of Al-doped ZnO (AZO) thin film coating prepared by direct current (DC) facing-target sputtering method at room temperature, of which the average optical transmittance is 81% between 400 and 700 nm while the sheet resistance is about 10 Ω/□. Then, based on this AZO coating, in order to enhance the transmittance, interfacial adhesion strength and weathering resistance, two kinds of antireflective coatings are designed for different application purposes. For the two kinds, the highest transmittances in the visible region (400-700 nm) can reach 86.9% and 81.8%, respectively. The design is performed using Macleod Optical Design software.

Original language	English
Article number	S10103
Journal	Chinese Optics Letters
Volume	11
Issue number	SUPPL.1
DOIs	https://doi.org/10.3788/COL201311.S10103
State	Published - Jun 2013

Access to Document

10.3788/COL201311.S10103

Cite this

@article{9a7e72190f5d4d108081b9f60807ce0c,

title = "Design of antireflective coatings for AZO low infrared emissivity layer",

abstract = "In this letter, we investigate the structural, optical, and electrical properties of Al-doped ZnO (AZO) thin film coating prepared by direct current (DC) facing-target sputtering method at room temperature, of which the average optical transmittance is 81\% between 400 and 700 nm while the sheet resistance is about 10 Ω/□. Then, based on this AZO coating, in order to enhance the transmittance, interfacial adhesion strength and weathering resistance, two kinds of antireflective coatings are designed for different application purposes. For the two kinds, the highest transmittances in the visible region (400-700 nm) can reach 86.9\% and 81.8\%, respectively. The design is performed using Macleod Optical Design software.",

author = "Tingting Guo and Liqing Zheng and Nshimiyimana, \{Jean Pierre\} and Xungang Diao and Qiang Chen",

year = "2013",

month = jun,

doi = "10.3788/COL201311.S10103",

language = "英语",

volume = "11",

journal = "Chinese Optics Letters",

issn = "1671-7694",

publisher = "Optica Publishing Group (formerly OSA)",

number = "SUPPL.1",

}

TY - JOUR

T1 - Design of antireflective coatings for AZO low infrared emissivity layer

AU - Guo, Tingting

AU - Zheng, Liqing

AU - Nshimiyimana, Jean Pierre

AU - Diao, Xungang

AU - Chen, Qiang

PY - 2013/6

Y1 - 2013/6

N2 - In this letter, we investigate the structural, optical, and electrical properties of Al-doped ZnO (AZO) thin film coating prepared by direct current (DC) facing-target sputtering method at room temperature, of which the average optical transmittance is 81% between 400 and 700 nm while the sheet resistance is about 10 Ω/□. Then, based on this AZO coating, in order to enhance the transmittance, interfacial adhesion strength and weathering resistance, two kinds of antireflective coatings are designed for different application purposes. For the two kinds, the highest transmittances in the visible region (400-700 nm) can reach 86.9% and 81.8%, respectively. The design is performed using Macleod Optical Design software.

AB - In this letter, we investigate the structural, optical, and electrical properties of Al-doped ZnO (AZO) thin film coating prepared by direct current (DC) facing-target sputtering method at room temperature, of which the average optical transmittance is 81% between 400 and 700 nm while the sheet resistance is about 10 Ω/□. Then, based on this AZO coating, in order to enhance the transmittance, interfacial adhesion strength and weathering resistance, two kinds of antireflective coatings are designed for different application purposes. For the two kinds, the highest transmittances in the visible region (400-700 nm) can reach 86.9% and 81.8%, respectively. The design is performed using Macleod Optical Design software.

UR - https://www.scopus.com/pages/publications/84881575108

U2 - 10.3788/COL201311.S10103

DO - 10.3788/COL201311.S10103

M3 - 文章

AN - SCOPUS:84881575108

SN - 1671-7694

VL - 11

JO - Chinese Optics Letters

JF - Chinese Optics Letters

IS - SUPPL.1

M1 - S10103

ER -

Design of antireflective coatings for AZO low infrared emissivity layer

Abstract

Access to Document

Other files and links

Fingerprint

Cite this