Design and implementation of gas temperature control system of heat-calibration wind tunnel

Chaozhi Cai; Yunhua Li; Sujun Dong

doi:10.1109/AIM.2014.6878094

Design and implementation of gas temperature control system of heat-calibration wind tunnel

Chaozhi Cai
, Yunhua Li^*
, Sujun Dong

^*Corresponding author for this work

Beihang University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Abstract

This paper deals with the design and implementation of the hot-gas temperature control system in heat-calibration wind tunnel. According to the control requirements for gas temperature of the heat-calibration wind tunnel, a fuel supply system based on variable frequency control technology and proportional throttle valve is designed. In order to improve the level of automation of the control system, a computer control system which consists of PLC and industrial personal computer is designed. On this basis, the dynamic characteristics of the system are analyzed, and the mathematical model of the system is established. Addressing the characteristics of the system, a DMC-PID cascade control law is used to achieve a precise control of the gas temperature of the heat-calibration wind tunnel.

Original language	English
Title of host publication	AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	291-296
Number of pages	6
ISBN (Print)	9781479957361
DOIs	https://doi.org/10.1109/AIM.2014.6878094
State	Published - 2014
Event	2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2014 - Besancon, France Duration: 8 Jul 2014 → 11 Jul 2014

Publication series

Name	IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM

Conference

Conference	2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2014
Country/Territory	France
City	Besancon
Period	8/07/14 → 11/07/14

Access to Document

10.1109/AIM.2014.6878094

Cite this

Cai, C., Li, Y., & Dong, S. (2014). Design and implementation of gas temperature control system of heat-calibration wind tunnel. In AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics (pp. 291-296). Article 6878094 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AIM.2014.6878094

Cai, Chaozhi ; Li, Yunhua ; Dong, Sujun. / Design and implementation of gas temperature control system of heat-calibration wind tunnel. AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 291-296 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

@inproceedings{e26a57cd6f5e416caf751a4e18606787,

title = "Design and implementation of gas temperature control system of heat-calibration wind tunnel",

abstract = "This paper deals with the design and implementation of the hot-gas temperature control system in heat-calibration wind tunnel. According to the control requirements for gas temperature of the heat-calibration wind tunnel, a fuel supply system based on variable frequency control technology and proportional throttle valve is designed. In order to improve the level of automation of the control system, a computer control system which consists of PLC and industrial personal computer is designed. On this basis, the dynamic characteristics of the system are analyzed, and the mathematical model of the system is established. Addressing the characteristics of the system, a DMC-PID cascade control law is used to achieve a precise control of the gas temperature of the heat-calibration wind tunnel.",

author = "Chaozhi Cai and Yunhua Li and Sujun Dong",

year = "2014",

doi = "10.1109/AIM.2014.6878094",

language = "英语",

isbn = "9781479957361",

series = "IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "291--296",

booktitle = "AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics",

address = "美国",

note = "2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2014 ; Conference date: 08-07-2014 Through 11-07-2014",

}

Cai, C, Li, Y & Dong, S 2014, Design and implementation of gas temperature control system of heat-calibration wind tunnel. in AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics., 6878094, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, Institute of Electrical and Electronics Engineers Inc., pp. 291-296, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2014, Besancon, France, 8/07/14. https://doi.org/10.1109/AIM.2014.6878094

Design and implementation of gas temperature control system of heat-calibration wind tunnel. / Cai, Chaozhi; Li, Yunhua ; Dong, Sujun.
AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., 2014. p. 291-296 6878094 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and implementation of gas temperature control system of heat-calibration wind tunnel

AU - Cai, Chaozhi

AU - Li, Yunhua

AU - Dong, Sujun

PY - 2014

Y1 - 2014

N2 - This paper deals with the design and implementation of the hot-gas temperature control system in heat-calibration wind tunnel. According to the control requirements for gas temperature of the heat-calibration wind tunnel, a fuel supply system based on variable frequency control technology and proportional throttle valve is designed. In order to improve the level of automation of the control system, a computer control system which consists of PLC and industrial personal computer is designed. On this basis, the dynamic characteristics of the system are analyzed, and the mathematical model of the system is established. Addressing the characteristics of the system, a DMC-PID cascade control law is used to achieve a precise control of the gas temperature of the heat-calibration wind tunnel.

AB - This paper deals with the design and implementation of the hot-gas temperature control system in heat-calibration wind tunnel. According to the control requirements for gas temperature of the heat-calibration wind tunnel, a fuel supply system based on variable frequency control technology and proportional throttle valve is designed. In order to improve the level of automation of the control system, a computer control system which consists of PLC and industrial personal computer is designed. On this basis, the dynamic characteristics of the system are analyzed, and the mathematical model of the system is established. Addressing the characteristics of the system, a DMC-PID cascade control law is used to achieve a precise control of the gas temperature of the heat-calibration wind tunnel.

UR - https://www.scopus.com/pages/publications/84906696297

U2 - 10.1109/AIM.2014.6878094

DO - 10.1109/AIM.2014.6878094

M3 - 会议稿件

AN - SCOPUS:84906696297

SN - 9781479957361

T3 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM

SP - 291

EP - 296

BT - AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2014

Y2 - 8 July 2014 through 11 July 2014

ER -

Cai C, Li Y , Dong S. Design and implementation of gas temperature control system of heat-calibration wind tunnel. In AIM 2014 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc. 2014. p. 291-296. 6878094. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM). doi: 10.1109/AIM.2014.6878094

Design and implementation of gas temperature control system of heat-calibration wind tunnel

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this