Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777))

Xiaogang Li; Zhipeng Cai; Xin Chen; Shuqing Dong; Wenhe Cai; Xiaoming Shi; Chaoyu Han; Yu Zhang; Kejian Li; Jiluan Pan

doi:10.1016/j.matchar.2021.110983

Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777))

Xiaogang Li
, Zhipeng Cai
, Xin Chen
, Shuqing Dong
, Wenhe Cai
, Xiaoming Shi
, Chaoyu Han
, Yu Zhang
, Kejian Li^*
, Jiluan Pan

^*Corresponding author for this work

Tsinghua University
Key Laboratory of Precision Opto-Mechatronics Technology (Ministry of Education)
Thermal Power Technology Research Institute
Ltd.

Research output: Contribution to journal › Comment/debate

Abstract

The authors regret in section 2.1 “Shielded metal arc welding with Inconel 182 electrode (ENiCrFe-3) was used for filling passes” should be “Tungsten inert gas welding with Inconel 82 (ERNiCr-3) filler wire was used for filling passes”, and “The chemical composition (wt%) of filler metal is 13.0–17.0 Cr, 0.10C, ≥59.0 Ni, 10.0 Fe, 5.0–9.0 Mn, 1.0 Nb, 1.0 Ti, 1.0 Si, 0.015 S, 0.03 P and ≤ 0.5 Cu” should be “The chemical composition (wt%) of filler metal is 18.0–22.0 Cr, 0.10 C, ≥67.0 Ni, 3.0 Fe, 2.5–3.5 Mn, 1.0–3.0 Nb, ≤ 0.75 Ti, ≤ 0.5 Cu, ≤ 0.12 Co, 0.5 Si, 0.015 S and 0.03 P". The authors would like to apologise for any inconvenience caused.

Original language	English
Article number	110983
Journal	Materials Characterization
Volume	174
DOIs	https://doi.org/10.1016/j.matchar.2021.110983
State	Published - Apr 2021
Externally published	Yes

Access to Document

10.1016/j.matchar.2021.110983

Fingerprint

Dive into the research topics of 'Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777))'. Together they form a unique fingerprint.

Cite this

Li, X., Cai, Z., Chen, X., Dong, S., Cai, W., Shi, X., Han, C., Zhang, Y., Li, K., & Pan, J. (2021). Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777)). Materials Characterization, 174, Article 110983. https://doi.org/10.1016/j.matchar.2021.110983

Li, Xiaogang ; Cai, Zhipeng ; Chen, Xin et al. / Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777)). In: Materials Characterization. 2021 ; Vol. 174.

@article{bbdea53d3353408a9f183a73a1ea9c8e,

title = "Corrigendum to {\textquoteleft}Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel{\textquoteright} [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777))",

abstract = "The authors regret in section 2.1 {\textquotedblleft}Shielded metal arc welding with Inconel 182 electrode (ENiCrFe-3) was used for filling passes{\textquotedblright} should be {\textquotedblleft}Tungsten inert gas welding with Inconel 82 (ERNiCr-3) filler wire was used for filling passes{\textquotedblright}, and {\textquotedblleft}The chemical composition (wt\%) of filler metal is 13.0{\textendash}17.0 Cr, 0.10C, ≥59.0 Ni, 10.0 Fe, 5.0{\textendash}9.0 Mn, 1.0 Nb, 1.0 Ti, 1.0 Si, 0.015 S, 0.03 P and ≤ 0.5 Cu{\textquotedblright} should be {\textquotedblleft}The chemical composition (wt\%) of filler metal is 18.0{\textendash}22.0 Cr, 0.10 C, ≥67.0 Ni, 3.0 Fe, 2.5{\textendash}3.5 Mn, 1.0{\textendash}3.0 Nb, ≤ 0.75 Ti, ≤ 0.5 Cu, ≤ 0.12 Co, 0.5 Si, 0.015 S and 0.03 P{"}. The authors would like to apologise for any inconvenience caused.",

author = "Xiaogang Li and Zhipeng Cai and Xin Chen and Shuqing Dong and Wenhe Cai and Xiaoming Shi and Chaoyu Han and Yu Zhang and Kejian Li and Jiluan Pan",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier Inc.",

year = "2021",

month = apr,

doi = "10.1016/j.matchar.2021.110983",

language = "英语",

volume = "174",

journal = "Materials Characterization",

issn = "1044-5803",

publisher = "Elsevier Inc.",

}

Li, X, Cai, Z, Chen, X, Dong, S, Cai, W, Shi, X, Han, C, Zhang, Y, Li, K & Pan, J 2021, 'Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777))', Materials Characterization, vol. 174, 110983. https://doi.org/10.1016/j.matchar.2021.110983

Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777)). / Li, Xiaogang; Cai, Zhipeng; Chen, Xin et al.
In: Materials Characterization, Vol. 174, 110983, 04.2021.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777))

AU - Li, Xiaogang

AU - Cai, Zhipeng

AU - Chen, Xin

AU - Dong, Shuqing

AU - Cai, Wenhe

AU - Shi, Xiaoming

AU - Han, Chaoyu

AU - Zhang, Yu

AU - Li, Kejian

AU - Pan, Jiluan

PY - 2021/4

Y1 - 2021/4

N2 - The authors regret in section 2.1 “Shielded metal arc welding with Inconel 182 electrode (ENiCrFe-3) was used for filling passes” should be “Tungsten inert gas welding with Inconel 82 (ERNiCr-3) filler wire was used for filling passes”, and “The chemical composition (wt%) of filler metal is 13.0–17.0 Cr, 0.10C, ≥59.0 Ni, 10.0 Fe, 5.0–9.0 Mn, 1.0 Nb, 1.0 Ti, 1.0 Si, 0.015 S, 0.03 P and ≤ 0.5 Cu” should be “The chemical composition (wt%) of filler metal is 18.0–22.0 Cr, 0.10 C, ≥67.0 Ni, 3.0 Fe, 2.5–3.5 Mn, 1.0–3.0 Nb, ≤ 0.75 Ti, ≤ 0.5 Cu, ≤ 0.12 Co, 0.5 Si, 0.015 S and 0.03 P". The authors would like to apologise for any inconvenience caused.

AB - The authors regret in section 2.1 “Shielded metal arc welding with Inconel 182 electrode (ENiCrFe-3) was used for filling passes” should be “Tungsten inert gas welding with Inconel 82 (ERNiCr-3) filler wire was used for filling passes”, and “The chemical composition (wt%) of filler metal is 13.0–17.0 Cr, 0.10C, ≥59.0 Ni, 10.0 Fe, 5.0–9.0 Mn, 1.0 Nb, 1.0 Ti, 1.0 Si, 0.015 S, 0.03 P and ≤ 0.5 Cu” should be “The chemical composition (wt%) of filler metal is 18.0–22.0 Cr, 0.10 C, ≥67.0 Ni, 3.0 Fe, 2.5–3.5 Mn, 1.0–3.0 Nb, ≤ 0.75 Ti, ≤ 0.5 Cu, ≤ 0.12 Co, 0.5 Si, 0.015 S and 0.03 P". The authors would like to apologise for any inconvenience caused.

UR - https://www.scopus.com/pages/publications/85101330066

U2 - 10.1016/j.matchar.2021.110983

DO - 10.1016/j.matchar.2021.110983

M3 - 评论/辩论

AN - SCOPUS:85101330066

SN - 1044-5803

VL - 174

JO - Materials Characterization

JF - Materials Characterization

M1 - 110983

ER -

Li X, Cai Z, Chen X, Dong S, Cai W, Shi X et al. Corrigendum to ‘Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austenitic stainless steel and low alloy ferritic steel’ [Mater. Charact. https://doi.org/10.1016/j.matchar.2020.110777] (Materials Characterization (2021) 171, (S1044580320322488), (10.1016/j.matchar.2020.110777)). Materials Characterization. 2021 Apr;174:110983. doi: 10.1016/j.matchar.2021.110983

Abstract

Access to Document

Other files and links

Fingerprint

Cite this