TY - GEN
T1 - Boundary rail method of mesh generation
AU - Hu, Bifu
AU - Xi, Ping
AU - Guo, Changhong
PY - 2010
Y1 - 2010
N2 - Complicate products are represented by a number of trimmed surfaces during the digitized modeling. Mesh generation of a trimmed surface is an important research subject in Computational Geometry. According to the geometric definition of a trimmed surface, numerous researchers adopt a method that generates meshes on trimmed surface by trimming meshes on non-trimmed surface. However, this approach can not be widely implemented because the meshes' shapes on trimmed surface's boundary are not as perfect as expected. Therefore, in order to solve the problem, this paper proposes a method called boundary rail method (BRM), which is applied to reconstructed the meshes on the trimmed surface's boundary and obtain perfect shapes of meshes.
AB - Complicate products are represented by a number of trimmed surfaces during the digitized modeling. Mesh generation of a trimmed surface is an important research subject in Computational Geometry. According to the geometric definition of a trimmed surface, numerous researchers adopt a method that generates meshes on trimmed surface by trimming meshes on non-trimmed surface. However, this approach can not be widely implemented because the meshes' shapes on trimmed surface's boundary are not as perfect as expected. Therefore, in order to solve the problem, this paper proposes a method called boundary rail method (BRM), which is applied to reconstructed the meshes on the trimmed surface's boundary and obtain perfect shapes of meshes.
KW - Boundary rail method
KW - Mesh generation
KW - Trimmed surface
UR - https://www.scopus.com/pages/publications/79952239167
U2 - 10.1109/iCECE.2010.654
DO - 10.1109/iCECE.2010.654
M3 - 会议稿件
AN - SCOPUS:79952239167
SN - 9780769540313
T3 - Proceedings - International Conference on Electrical and Control Engineering, ICECE 2010
SP - 2680
EP - 2683
BT - Proceedings - International Conference on Electrical and Control Engineering, ICECE 2010
T2 - International Conference on Electrical and Control Engineering, ICECE 2010
Y2 - 26 June 2010 through 28 June 2010
ER -