A configuration and analysis system for box-joint assembly tooling

Yiwei Wang; Lianyu Zheng; Qingjun Liu

doi:10.1007/978-3-642-34531-9_19

A configuration and analysis system for box-joint assembly tooling

Yiwei Wang
, Lianyu Zheng^*
, Qingjun Liu

^*Corresponding author for this work

School of Mechanical Engineering and Automation

Beihang University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The Box-joint tooling, which can rapidly adapt to the variant products and the modified structures, is a new type of flexible tooling with high reconfigurability. In this paper the reconfigurability of the Box-joint assembly tooling are analyzed in detail, and the configuration and analysis system is developed in the CATIA software. Subsequently the structure and functions of the system are presented, then each module of the system is described in detail. Finally the floor-beams of a certain fuselage are taken as an example to validate the functions of the system. The results indicate that by using this system, workload of tooling designers can be largely reduced, and the design efficiency is siginificantly increased.

Original language	English
Title of host publication	Proceedings of the 2012 International Conference on Information Technology and Software Engineering - Software Engineering and Digital Media Technology
Pages	175-183
Number of pages	9
DOIs	https://doi.org/10.1007/978-3-642-34531-9_19
State	Published - 2013
Event	2012 International Conference on Information Technology and Software Engineering, ITSE 2012 - Beijing, China Duration: 8 Dec 2012 → 10 Dec 2012

Publication series

Name	Lecture Notes in Electrical Engineering
Volume	212 LNEE
ISSN (Print)	1876-1100
ISSN (Electronic)	1876-1119

Conference

Conference	2012 International Conference on Information Technology and Software Engineering, ITSE 2012
Country/Territory	China
City	Beijing
Period	8/12/12 → 10/12/12

Keywords

Box-joint assembly tooling
Configuration system
Reconfigurable tooling
Tooling configuration

Access to Document

10.1007/978-3-642-34531-9_19

Cite this

Wang, Y., Zheng, L., & Liu, Q. (2013). A configuration and analysis system for box-joint assembly tooling. In Proceedings of the 2012 International Conference on Information Technology and Software Engineering - Software Engineering and Digital Media Technology (pp. 175-183). (Lecture Notes in Electrical Engineering; Vol. 212 LNEE). https://doi.org/10.1007/978-3-642-34531-9_19

@inproceedings{d4ac594e2ffe4b53aded92b5d47cc058,

title = "A configuration and analysis system for box-joint assembly tooling",

abstract = "The Box-joint tooling, which can rapidly adapt to the variant products and the modified structures, is a new type of flexible tooling with high reconfigurability. In this paper the reconfigurability of the Box-joint assembly tooling are analyzed in detail, and the configuration and analysis system is developed in the CATIA software. Subsequently the structure and functions of the system are presented, then each module of the system is described in detail. Finally the floor-beams of a certain fuselage are taken as an example to validate the functions of the system. The results indicate that by using this system, workload of tooling designers can be largely reduced, and the design efficiency is siginificantly increased.",

keywords = "Box-joint assembly tooling, Configuration system, Reconfigurable tooling, Tooling configuration",

author = "Yiwei Wang and Lianyu Zheng and Qingjun Liu",

year = "2013",

doi = "10.1007/978-3-642-34531-9\_19",

language = "英语",

isbn = "9783642345302",

series = "Lecture Notes in Electrical Engineering",

pages = "175--183",

booktitle = "Proceedings of the 2012 International Conference on Information Technology and Software Engineering - Software Engineering and Digital Media Technology",

note = "2012 International Conference on Information Technology and Software Engineering, ITSE 2012 ; Conference date: 08-12-2012 Through 10-12-2012",

}

Wang, Y, Zheng, L & Liu, Q 2013, A configuration and analysis system for box-joint assembly tooling. in Proceedings of the 2012 International Conference on Information Technology and Software Engineering - Software Engineering and Digital Media Technology. Lecture Notes in Electrical Engineering, vol. 212 LNEE, pp. 175-183, 2012 International Conference on Information Technology and Software Engineering, ITSE 2012, Beijing, China, 8/12/12. https://doi.org/10.1007/978-3-642-34531-9_19

A configuration and analysis system for box-joint assembly tooling. / Wang, Yiwei; Zheng, Lianyu; Liu, Qingjun.
Proceedings of the 2012 International Conference on Information Technology and Software Engineering - Software Engineering and Digital Media Technology. 2013. p. 175-183 (Lecture Notes in Electrical Engineering; Vol. 212 LNEE).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A configuration and analysis system for box-joint assembly tooling

AU - Wang, Yiwei

AU - Zheng, Lianyu

AU - Liu, Qingjun

PY - 2013

Y1 - 2013

N2 - The Box-joint tooling, which can rapidly adapt to the variant products and the modified structures, is a new type of flexible tooling with high reconfigurability. In this paper the reconfigurability of the Box-joint assembly tooling are analyzed in detail, and the configuration and analysis system is developed in the CATIA software. Subsequently the structure and functions of the system are presented, then each module of the system is described in detail. Finally the floor-beams of a certain fuselage are taken as an example to validate the functions of the system. The results indicate that by using this system, workload of tooling designers can be largely reduced, and the design efficiency is siginificantly increased.

AB - The Box-joint tooling, which can rapidly adapt to the variant products and the modified structures, is a new type of flexible tooling with high reconfigurability. In this paper the reconfigurability of the Box-joint assembly tooling are analyzed in detail, and the configuration and analysis system is developed in the CATIA software. Subsequently the structure and functions of the system are presented, then each module of the system is described in detail. Finally the floor-beams of a certain fuselage are taken as an example to validate the functions of the system. The results indicate that by using this system, workload of tooling designers can be largely reduced, and the design efficiency is siginificantly increased.

KW - Box-joint assembly tooling

KW - Configuration system

KW - Reconfigurable tooling

KW - Tooling configuration

UR - https://www.scopus.com/pages/publications/84869414507

U2 - 10.1007/978-3-642-34531-9_19

DO - 10.1007/978-3-642-34531-9_19

M3 - 会议稿件

AN - SCOPUS:84869414507

SN - 9783642345302

T3 - Lecture Notes in Electrical Engineering

SP - 175

EP - 183

BT - Proceedings of the 2012 International Conference on Information Technology and Software Engineering - Software Engineering and Digital Media Technology

T2 - 2012 International Conference on Information Technology and Software Engineering, ITSE 2012

Y2 - 8 December 2012 through 10 December 2012

ER -

A configuration and analysis system for box-joint assembly tooling

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this