8.5: Numerical simulation and experimental test of a sheet beam electron gun

Ding Zhao; Cunjun Ruan; Yong Wang; Wang Ruan

doi:10.1109/IVELEC.2010.5503584

8.5: Numerical simulation and experimental test of a sheet beam electron gun

Ding Zhao^*
, Cunjun Ruan
, Yong Wang
, Wang Ruan

^*Corresponding author for this work

CAS - Institute of Electronics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

In the late year, a sheet beam electron gun was designed and tested as the first step for the planned high power X-band sheet beam klystron. The primary design parameters of electron gun are as follows: beam voltage 300 kV, beam current 330 A, then the beam perveance is about 2.0 μp. According to the electric structure from simulation, a prototype gun is built and tested. The preliminary experimental results in the low voltage region have shown that the sheet beam gun is successful until now.

Original language	English
Title of host publication	2010 IEEE International Vacuum Electronics Conference, IVEC 2010
Pages	101-102
Number of pages	2
DOIs	https://doi.org/10.1109/IVELEC.2010.5503584
State	Published - 2010
Externally published	Yes
Event	2010 IEEE International Vacuum Electronics Conference, IVEC 2010 - Monterey, CA, United States Duration: 18 May 2010 → 20 May 2010

Publication series

Name	2010 IEEE International Vacuum Electronics Conference, IVEC 2010

Conference

Conference	2010 IEEE International Vacuum Electronics Conference, IVEC 2010
Country/Territory	United States
City	Monterey, CA
Period	18/05/10 → 20/05/10

Keywords

Electron gun
Experimental test
Sheet beam
Simulation

Access to Document

10.1109/IVELEC.2010.5503584

Cite this

@inproceedings{5657940dc472444ebc58d194c2ab6f18,

title = "8.5: Numerical simulation and experimental test of a sheet beam electron gun",

abstract = "In the late year, a sheet beam electron gun was designed and tested as the first step for the planned high power X-band sheet beam klystron. The primary design parameters of electron gun are as follows: beam voltage 300 kV, beam current 330 A, then the beam perveance is about 2.0 μp. According to the electric structure from simulation, a prototype gun is built and tested. The preliminary experimental results in the low voltage region have shown that the sheet beam gun is successful until now.",

keywords = "Electron gun, Experimental test, Sheet beam, Simulation",

author = "Ding Zhao and Cunjun Ruan and Yong Wang and Wang Ruan",

year = "2010",

doi = "10.1109/IVELEC.2010.5503584",

language = "英语",

isbn = "9781424470976",

series = "2010 IEEE International Vacuum Electronics Conference, IVEC 2010",

pages = "101--102",

booktitle = "2010 IEEE International Vacuum Electronics Conference, IVEC 2010",

note = "2010 IEEE International Vacuum Electronics Conference, IVEC 2010 ; Conference date: 18-05-2010 Through 20-05-2010",

}

Zhao, D, Ruan, C, Wang, Y & Ruan, W 2010, 8.5: Numerical simulation and experimental test of a sheet beam electron gun. in 2010 IEEE International Vacuum Electronics Conference, IVEC 2010., 5503584, 2010 IEEE International Vacuum Electronics Conference, IVEC 2010, pp. 101-102, 2010 IEEE International Vacuum Electronics Conference, IVEC 2010, Monterey, CA, United States, 18/05/10. https://doi.org/10.1109/IVELEC.2010.5503584

8.5: Numerical simulation and experimental test of a sheet beam electron gun. / Zhao, Ding; Ruan, Cunjun; Wang, Yong et al.
2010 IEEE International Vacuum Electronics Conference, IVEC 2010. 2010. p. 101-102 5503584 (2010 IEEE International Vacuum Electronics Conference, IVEC 2010).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - 8.5

T2 - 2010 IEEE International Vacuum Electronics Conference, IVEC 2010

AU - Zhao, Ding

AU - Ruan, Cunjun

AU - Wang, Yong

AU - Ruan, Wang

PY - 2010

Y1 - 2010

N2 - In the late year, a sheet beam electron gun was designed and tested as the first step for the planned high power X-band sheet beam klystron. The primary design parameters of electron gun are as follows: beam voltage 300 kV, beam current 330 A, then the beam perveance is about 2.0 μp. According to the electric structure from simulation, a prototype gun is built and tested. The preliminary experimental results in the low voltage region have shown that the sheet beam gun is successful until now.

AB - In the late year, a sheet beam electron gun was designed and tested as the first step for the planned high power X-band sheet beam klystron. The primary design parameters of electron gun are as follows: beam voltage 300 kV, beam current 330 A, then the beam perveance is about 2.0 μp. According to the electric structure from simulation, a prototype gun is built and tested. The preliminary experimental results in the low voltage region have shown that the sheet beam gun is successful until now.

KW - Electron gun

KW - Experimental test

KW - Sheet beam

KW - Simulation

UR - https://www.scopus.com/pages/publications/77954848551

U2 - 10.1109/IVELEC.2010.5503584

DO - 10.1109/IVELEC.2010.5503584

M3 - 会议稿件

AN - SCOPUS:77954848551

SN - 9781424470976

T3 - 2010 IEEE International Vacuum Electronics Conference, IVEC 2010

SP - 101

EP - 102

BT - 2010 IEEE International Vacuum Electronics Conference, IVEC 2010

Y2 - 18 May 2010 through 20 May 2010

ER -

8.5: Numerical simulation and experimental test of a sheet beam electron gun

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this